Special Functions (GPS, Clocks

Home

Vendors

Products

Special Functions (GPS, Clocks

PMC Spacewire: (from Dynamic Engineering)
Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high speed parallel paths.
The PMC SpaceWire is easy to use. Point and shoot - just fill the FIFO and set the start bit to get your custom protocol transmitting. Built in loop-back capabilities and engineering kits help with integration into your system. Windows driver available. Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high-speed parallel paths.

http://www.dyneng.com/pmc_SpaceWire.html

PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-Serial: (from Dynamic Engineering)
PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

PMC-XM: (from Dynamic Engineering)
The PMC-XM is intended for use in situations where the user wants to control the design. PMC-XM has two FPGA devices built in. The first device takes care of the PCI interface, DMA etc. The second device [Virtex XC4VSX35-10] is for the user application. The Transition Module [XM] is attached to the Virtex device. The Virtex is further supported by a 1M x 36 QDR SRAM, PLL, Digital Temperature Sensor, and connections to the PMC Pn4 connector. Four LEDs are supplied to the Virtex to provide design status, debugging support and other user purposes.
To make integration easy an engineering kit is available. The engineering kit has a base "footprint", written in VHDL. A windows® driver is also part of the engineering kit.

CCII Environmental Monitoring & Control (EMAC) PMC: (from CCII Systems (Pty) Ltd)
Provides a compact solution for monitoring the health of a system's internal environment, including power supplies, temperatures, smoke and cooling fan operation. Eight open collector and eight digital output lines are also provided for the control of the monitored system.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

An EMAC Unit, a standalone unit in its own housing based on the board-level EMAC Adapter, is also available. In the standalone form, the EMAC communicates to its host via an RS232 serial link.

No software drivers are required.

CCII GPS+High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus four channels of high-speed (> 10 Mbps) serial I/O and one channel of UART (< 1 Mbps) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII GPS+UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus one channel of UART (Universal Asynchronous Transmitter/Receiver) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII MIL-STD-1553B PMC: (from CCII Systems (Pty) Ltd)
The MIL-STD-1553B PMC Adapter provides validated MIL-STD-1553B communications. The MIL-STD-1553B PMC Adapter is extremely rugged, with a high MTBF.

Front-panel I/O, sub-miniature twinaxial connectors, 3 lug, 'P' keyring ('R', 'W', 'FL' or threaded keyring optional). Conduction-cooled version has rear connector I/O only.

Available in three air-cooled grades : Ruggedised (-40 C to +85 C), Industrial (-15 C to +75 C) and Commerical (0 C to +55 C).

Interfaces to 32-bit, 33 MHz PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with Single CMC formfactor IEEE P1386.1 specification.

Various software drivers offered including VxWorks. Can be combined with other serial I/O, e.g. RS232, RS422, RS485, CANbus, Gigabit Ethernet, Fibre Channel, etc.

CCII Vehicle Management and Monitoring (VMM) PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.

Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high speed parallel paths.
The PMC SpaceWire is easy to use. Point and shoot - just fill the FIFO and set the start bit to get your custom protocol transmitting. Built in loop-back capabilities and engineering kits help with integration into your system. Windows driver available. Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high-speed parallel paths.

http://www.dyneng.com/pmc_SpaceWire.html
PMC-4U: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

PMC-Serial: (from Dynamic Engineering)
PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

PMC-XM: (from Dynamic Engineering)
The PMC-XM is intended for use in situations where the user wants to control the design. PMC-XM has two FPGA devices built in. The first device takes care of the PCI interface, DMA etc. The second device [Virtex XC4VSX35-10] is for the user application. The Transition Module [XM] is attached to the Virtex device. The Virtex is further supported by a 1M x 36 QDR SRAM, PLL, Digital Temperature Sensor, and connections to the PMC Pn4 connector. Four LEDs are supplied to the Virtex to provide design status, debugging support and other user purposes.
To make integration easy an engineering kit is available. The engineering kit has a base "footprint", written in VHDL. A windows® driver is also part of the engineering kit.

CCII Environmental Monitoring & Control (EMAC) PMC: (from CCII Systems (Pty) Ltd)
Provides a compact solution for monitoring the health of a system's internal environment, including power supplies, temperatures, smoke and cooling fan operation. Eight open collector and eight digital output lines are also provided for the control of the monitored system.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

An EMAC Unit, a standalone unit in its own housing based on the board-level EMAC Adapter, is also available. In the standalone form, the EMAC communicates to its host via an RS232 serial link.

No software drivers are required.

CCII GPS+High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus four channels of high-speed (> 10 Mbps) serial I/O and one channel of UART (< 1 Mbps) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII GPS+UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus one channel of UART (Universal Asynchronous Transmitter/Receiver) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII MIL-STD-1553B PMC: (from CCII Systems (Pty) Ltd)
The MIL-STD-1553B PMC Adapter provides validated MIL-STD-1553B communications. The MIL-STD-1553B PMC Adapter is extremely rugged, with a high MTBF.

Front-panel I/O, sub-miniature twinaxial connectors, 3 lug, 'P' keyring ('R', 'W', 'FL' or threaded keyring optional). Conduction-cooled version has rear connector I/O only.

Available in three air-cooled grades : Ruggedised (-40 C to +85 C), Industrial (-15 C to +75 C) and Commerical (0 C to +55 C).

Interfaces to 32-bit, 33 MHz PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with Single CMC formfactor IEEE P1386.1 specification.

Various software drivers offered including VxWorks. Can be combined with other serial I/O, e.g. RS232, RS422, RS485, CANbus, Gigabit Ethernet, Fibre Channel, etc.

CCII Vehicle Management and Monitoring (VMM) PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.

Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.
PMC-Serial: (from Dynamic Engineering)
PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

PMC-XM: (from Dynamic Engineering)
The PMC-XM is intended for use in situations where the user wants to control the design. PMC-XM has two FPGA devices built in. The first device takes care of the PCI interface, DMA etc. The second device [Virtex XC4VSX35-10] is for the user application. The Transition Module [XM] is attached to the Virtex device. The Virtex is further supported by a 1M x 36 QDR SRAM, PLL, Digital Temperature Sensor, and connections to the PMC Pn4 connector. Four LEDs are supplied to the Virtex to provide design status, debugging support and other user purposes.
To make integration easy an engineering kit is available. The engineering kit has a base "footprint", written in VHDL. A windows® driver is also part of the engineering kit.

CCII Environmental Monitoring & Control (EMAC) PMC: (from CCII Systems (Pty) Ltd)
Provides a compact solution for monitoring the health of a system's internal environment, including power supplies, temperatures, smoke and cooling fan operation. Eight open collector and eight digital output lines are also provided for the control of the monitored system.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

An EMAC Unit, a standalone unit in its own housing based on the board-level EMAC Adapter, is also available. In the standalone form, the EMAC communicates to its host via an RS232 serial link.

No software drivers are required.

CCII GPS+High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus four channels of high-speed (> 10 Mbps) serial I/O and one channel of UART (< 1 Mbps) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII GPS+UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus one channel of UART (Universal Asynchronous Transmitter/Receiver) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII MIL-STD-1553B PMC: (from CCII Systems (Pty) Ltd)
The MIL-STD-1553B PMC Adapter provides validated MIL-STD-1553B communications. The MIL-STD-1553B PMC Adapter is extremely rugged, with a high MTBF.

Front-panel I/O, sub-miniature twinaxial connectors, 3 lug, 'P' keyring ('R', 'W', 'FL' or threaded keyring optional). Conduction-cooled version has rear connector I/O only.

Available in three air-cooled grades : Ruggedised (-40 C to +85 C), Industrial (-15 C to +75 C) and Commerical (0 C to +55 C).

Interfaces to 32-bit, 33 MHz PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with Single CMC formfactor IEEE P1386.1 specification.

Various software drivers offered including VxWorks. Can be combined with other serial I/O, e.g. RS232, RS422, RS485, CANbus, Gigabit Ethernet, Fibre Channel, etc.

CCII Vehicle Management and Monitoring (VMM) PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.

Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC
PMC-XM: (from Dynamic Engineering)
The PMC-XM is intended for use in situations where the user wants to control the design. PMC-XM has two FPGA devices built in. The first device takes care of the PCI interface, DMA etc. The second device [Virtex XC4VSX35-10] is for the user application. The Transition Module [XM] is attached to the Virtex device. The Virtex is further supported by a 1M x 36 QDR SRAM, PLL, Digital Temperature Sensor, and connections to the PMC Pn4 connector. Four LEDs are supplied to the Virtex to provide design status, debugging support and other user purposes.
To make integration easy an engineering kit is available. The engineering kit has a base "footprint", written in VHDL. A windows® driver is also part of the engineering kit.

CCII Environmental Monitoring & Control (EMAC) PMC: (from CCII Systems (Pty) Ltd)
Provides a compact solution for monitoring the health of a system's internal environment, including power supplies, temperatures, smoke and cooling fan operation. Eight open collector and eight digital output lines are also provided for the control of the monitored system.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

An EMAC Unit, a standalone unit in its own housing based on the board-level EMAC Adapter, is also available. In the standalone form, the EMAC communicates to its host via an RS232 serial link.

No software drivers are required.

CCII GPS+High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus four channels of high-speed (> 10 Mbps) serial I/O and one channel of UART (< 1 Mbps) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII GPS+UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus one channel of UART (Universal Asynchronous Transmitter/Receiver) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII MIL-STD-1553B PMC: (from CCII Systems (Pty) Ltd)
The MIL-STD-1553B PMC Adapter provides validated MIL-STD-1553B communications. The MIL-STD-1553B PMC Adapter is extremely rugged, with a high MTBF.

Front-panel I/O, sub-miniature twinaxial connectors, 3 lug, 'P' keyring ('R', 'W', 'FL' or threaded keyring optional). Conduction-cooled version has rear connector I/O only.

Available in three air-cooled grades : Ruggedised (-40 C to +85 C), Industrial (-15 C to +75 C) and Commerical (0 C to +55 C).

Interfaces to 32-bit, 33 MHz PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with Single CMC formfactor IEEE P1386.1 specification.

Various software drivers offered including VxWorks. Can be combined with other serial I/O, e.g. RS232, RS422, RS485, CANbus, Gigabit Ethernet, Fibre Channel, etc.

CCII Vehicle Management and Monitoring (VMM) PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.

Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: The PMC-XM is intended for use in situations where the user wants to control the design. PMC-XM has two FPGA devices built in. The first device takes care of the PCI interface, DMA etc. The second device [Virtex XC4VSX35-10] is for the user application. The Transition Module [XM] is attached to the Virtex device. The Virtex is further supported by a 1M x 36 QDR SRAM, PLL, Digital Temperature Sensor, and connections to the PMC Pn4 connector. Four LEDs are supplied to the Virtex to provide design status, debugging support and other user purposes.
To make integration easy an engineering kit is available. The engineering kit has a base "footprint", written in VHDL. A windows® driver is also part of the engineering kit.
CCII Environmental Monitoring & Control (EMAC) PMC: (from CCII Systems (Pty) Ltd)
Provides a compact solution for monitoring the health of a system's internal environment, including power supplies, temperatures, smoke and cooling fan operation. Eight open collector and eight digital output lines are also provided for the control of the monitored system.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

An EMAC Unit, a standalone unit in its own housing based on the board-level EMAC Adapter, is also available. In the standalone form, the EMAC communicates to its host via an RS232 serial link.

No software drivers are required.

CCII GPS+High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus four channels of high-speed (> 10 Mbps) serial I/O and one channel of UART (< 1 Mbps) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII GPS+UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus one channel of UART (Universal Asynchronous Transmitter/Receiver) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII MIL-STD-1553B PMC: (from CCII Systems (Pty) Ltd)
The MIL-STD-1553B PMC Adapter provides validated MIL-STD-1553B communications. The MIL-STD-1553B PMC Adapter is extremely rugged, with a high MTBF.

Front-panel I/O, sub-miniature twinaxial connectors, 3 lug, 'P' keyring ('R', 'W', 'FL' or threaded keyring optional). Conduction-cooled version has rear connector I/O only.

Available in three air-cooled grades : Ruggedised (-40 C to +85 C), Industrial (-15 C to +75 C) and Commerical (0 C to +55 C).

Interfaces to 32-bit, 33 MHz PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with Single CMC formfactor IEEE P1386.1 specification.

Various software drivers offered including VxWorks. Can be combined with other serial I/O, e.g. RS232, RS422, RS485, CANbus, Gigabit Ethernet, Fibre Channel, etc.

CCII Vehicle Management and Monitoring (VMM) PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.

Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: Provides a compact solution for monitoring the health of a system's internal environment, including power supplies, temperatures, smoke and cooling fan operation. Eight open collector and eight digital output lines are also provided for the control of the monitored system.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

An EMAC Unit, a standalone unit in its own housing based on the board-level EMAC Adapter, is also available. In the standalone form, the EMAC communicates to its host via an RS232 serial link.

No software drivers are required.
CCII GPS+High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus four channels of high-speed (> 10 Mbps) serial I/O and one channel of UART (< 1 Mbps) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII GPS+UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus one channel of UART (Universal Asynchronous Transmitter/Receiver) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII MIL-STD-1553B PMC: (from CCII Systems (Pty) Ltd)
The MIL-STD-1553B PMC Adapter provides validated MIL-STD-1553B communications. The MIL-STD-1553B PMC Adapter is extremely rugged, with a high MTBF.

Front-panel I/O, sub-miniature twinaxial connectors, 3 lug, 'P' keyring ('R', 'W', 'FL' or threaded keyring optional). Conduction-cooled version has rear connector I/O only.

Available in three air-cooled grades : Ruggedised (-40 C to +85 C), Industrial (-15 C to +75 C) and Commerical (0 C to +55 C).

Interfaces to 32-bit, 33 MHz PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with Single CMC formfactor IEEE P1386.1 specification.

Various software drivers offered including VxWorks. Can be combined with other serial I/O, e.g. RS232, RS422, RS485, CANbus, Gigabit Ethernet, Fibre Channel, etc.

CCII Vehicle Management and Monitoring (VMM) PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.

Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: Provides an integrated GPS receiver plus four channels of high-speed (> 10 Mbps) serial I/O and one channel of UART (< 1 Mbps) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)
CCII GPS+UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated GPS receiver plus one channel of UART (Universal Asynchronous Transmitter/Receiver) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII MIL-STD-1553B PMC: (from CCII Systems (Pty) Ltd)
The MIL-STD-1553B PMC Adapter provides validated MIL-STD-1553B communications. The MIL-STD-1553B PMC Adapter is extremely rugged, with a high MTBF.

Front-panel I/O, sub-miniature twinaxial connectors, 3 lug, 'P' keyring ('R', 'W', 'FL' or threaded keyring optional). Conduction-cooled version has rear connector I/O only.

Available in three air-cooled grades : Ruggedised (-40 C to +85 C), Industrial (-15 C to +75 C) and Commerical (0 C to +55 C).

Interfaces to 32-bit, 33 MHz PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with Single CMC formfactor IEEE P1386.1 specification.

Various software drivers offered including VxWorks. Can be combined with other serial I/O, e.g. RS232, RS422, RS485, CANbus, Gigabit Ethernet, Fibre Channel, etc.

CCII Vehicle Management and Monitoring (VMM) PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.

Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: Provides an integrated GPS receiver plus one channel of UART (Universal Asynchronous Transmitter/Receiver) serial I/O. An external DGPS input is provided.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Commercial and industrial versions use front-panel I/O with SMA connector for GPS Antenna. Conduction-cooled version uses rear connector PMC JN4 I/O and has various SMA connector alignment options to facilitate GPS antenna routing in conduction-cooled installation.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.
CCII MIL-STD-1553B PMC: (from CCII Systems (Pty) Ltd)
The MIL-STD-1553B PMC Adapter provides validated MIL-STD-1553B communications. The MIL-STD-1553B PMC Adapter is extremely rugged, with a high MTBF.

Front-panel I/O, sub-miniature twinaxial connectors, 3 lug, 'P' keyring ('R', 'W', 'FL' or threaded keyring optional). Conduction-cooled version has rear connector I/O only.

Available in three air-cooled grades : Ruggedised (-40 C to +85 C), Industrial (-15 C to +75 C) and Commerical (0 C to +55 C).

Interfaces to 32-bit, 33 MHz PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with Single CMC formfactor IEEE P1386.1 specification.

Various software drivers offered including VxWorks. Can be combined with other serial I/O, e.g. RS232, RS422, RS485, CANbus, Gigabit Ethernet, Fibre Channel, etc.

CCII Vehicle Management and Monitoring (VMM) PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.

Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: The MIL-STD-1553B PMC Adapter provides validated MIL-STD-1553B communications. The MIL-STD-1553B PMC Adapter is extremely rugged, with a high MTBF.

Front-panel I/O, sub-miniature twinaxial connectors, 3 lug, 'P' keyring ('R', 'W', 'FL' or threaded keyring optional). Conduction-cooled version has rear connector I/O only.

Available in three air-cooled grades : Ruggedised (-40 C to +85 C), Industrial (-15 C to +75 C) and Commerical (0 C to +55 C).

Interfaces to 32-bit, 33 MHz PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with Single CMC formfactor IEEE P1386.1 specification.

Various software drivers offered including VxWorks. Can be combined with other serial I/O, e.g. RS232, RS422, RS485, CANbus, Gigabit Ethernet, Fibre Channel, etc.
CCII Vehicle Management and Monitoring (VMM) PMC: (from CCII Systems (Pty) Ltd)
Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.

Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: Provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

Incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API).

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.1 specification. Mechanically complies with single CMC formfactor IEEE P1386.1/Draft 2.0. Access to all VMM functionality via powerful serial API. VMM PMC emulates an industry standard 16550 compatible UART when inserted in a PMC host.

No software drivers are required.
Eagle Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.

Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: Eagle, a member of the Hawkeye family, is a flexible and powerful radar scan converter which is based upon field proven technology and comes in a compact and mechanically ruggedized PMC form factor. Eagle is a low power, rugged design that will operate in a wide range of environments, including conditions of high temperature and vibration. Radar data is passed to the card via high-speed PCI bus transfers. This can originate either from a CWCEC Osprey PMC Radar Input Card or via network from a radar video server. Eagle digitally combines the generated radar image with the output from a standard DVI output (PanelLink) graphics card, such as our Falcon PMC Graphics and Video Windows Card. There are many such DVI output graphics cards available. During video keying, the Eagle is able to place the video from the graphics card either as an underlay or as an overlay to the radar image. This feature is typically used to allow target symbols to be presented as overlays and maps to be presented as underlays.
Eagle-2 Hi-Res Radar Scan Converter PMC: (from Curtiss-Wright Controls, Inc.)
Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.

Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: Eagle-2 is the latest in the line of high-performance radar scan converters from Curtiss-Wright Controls Embedded Computing. Eagle-2 provides improved performance and support for high-resolution screen displays up to 2560 x 1600, including 2048 x 2048, making it the perfect choice for high-end radar display applications.

Radar scan conversion on the Eagle-2 is performed using the field proven White-Powell algorithm, combining the best features of both forward and reverse scan conversion. This powerful algorithm ensures that there are no holes or spokes in the displayed image, even when zooming-in at long range, and that all single point targets are displayed. Radar data is passed to the card via high-speed PCI-X bus transfers. Data can originate either from a Curtiss-Wright Osiris radar input card or via network from a radar video server such as Curtiss-Wright´s RVP radar video processing product.
Orion JPEG2000: (from Curtiss-Wright Controls, Inc.)
Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.

Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: Orion provides real-time JPEG2000 video compression and decompression capabilities for video distribution and recording applications.

Available in PMC and PCI formats, Orion brings high-performance video compression to a variety of system architectures including VME, cPCI, PCI and VPX. Air-cooled and conduction-cooled variants of the PMC variant make the Orion ideal for applications ranging from naval ship-wide video distribution systems through to rugged recording applications on fast-jet and helicopter platforms.

Orion provides a dual channel capability for the compression or decompression of video at standard NTSC and PAL resolutions. Each channel can be configured as either an input or output channel. This allows Orion to be configured to provide simultaneous record and replay functionality by using one of the two channels for each function.
Osiris dual channel radar interface: (from Curtiss-Wright Controls, Inc.)
Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.

PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: Osiris is a high-performance, dual channel radar interface board that accepts and processes analogue and digital radar signals and provides a PCI interface to applications. Osiris comes from a long history of radar interface products at Curtiss-Wright (formerly Primagraphics), with interfaces to support many legacy and modern radar types. With an on-board FPGA and high-speed PCI interface, Osiris offers high performance with two independent channels on a half-length PCI or PMC mezzanine format.
PMC-110 CryptoNet: (from Curtiss-Wright Controls, Inc.)
The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.

VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: The CryptoNet security PMC allows a modular approach to creating embedded security solutions for new and legacy systems. Systems integrators can populate a PMC-110 CryptoNet on Single Board Computers (SBC), Digital Signal Processors (DSP), Carrier Cards or Custom Cards to add security to their application.

The PMC-110 CryptoNet can also be coupled with a Curtiss-Wright 682 or 684 router to enable an all-in-one `Unified Threat Management´ (UTM) system capable of strong perimeter defense. The PMC-110 solution on a router comes with a complete turn-key solution that includes Enhanced Security Software that provides VPN (IPSec/PPTP/L2TP) to protect dedicated networks, an ICSA certified statefull firewall to protect against multiple evasive attacks, Network Address Translation (NAT) routing for IPv4 masquerading, IPv6 with IPSec tunneling for secure communications channels, and advanced standards based cryptographic functions such as encryption, decryption, authentication and key generation.
VME 6U COOL: (from Dynamic Engineering)
VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html: VME 6U Fan board to Cool your hardware 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. Fan positions are customer specified for any or all locations. 6U size (Also Available in cPCI)
http://www.dyneng.com/vme_6u_cool.html