Analog I/O

Home

Vendors

Products

Analog I/O

7131 16-Ch Multiband Digital Receiver & A/D PMC: (from Pentek)
--Two 80 or 100 MHz, 14-bit A/D converters --16 channels of multiband digital receivers --5 kHz to 10 MHz output bandwidth for .S = 100 MHz --250 MHz input bandwidth --Ideal for IF sampling --User-configurable Xilinx Virtex-II FPGA --Custom FPGA I/O through P4 PMC connector --Bypass path allows direct capture of A/D data --Front panel clock and sync bus --Synchronization for up to 80 modules (with Model 9190) --Drivers for popular processor board platforms

AD1520 1.5GSPS 8-bit ADC: (from Curtiss-Wright Controls, Inc.)
The AD1520 is a second generation 1.5GSPS ADC XMC module and follows on from the AD1500. The AD1520 uses a newer generation ADC device and key benefits include increase full power bandwidth (from 1.5 to over 2GHz) and general improvement in ENOB, SFDR and SNR.

The AD1520 closely couples a high performance Xilinx Virtex-5 FPGA to a dual channel high-speed analog input front end providing both processing and up to 1.5GSPS acquisition (per channel) in a single XMC/PMC card. The combination of a user programmable FPGA, data I/O sub-systems and multiple banks of fast memory provides a powerful platform for acquiring and processing high-speed data in one board. In addition to processing digitized data, the Xilinx Virtex-5 SXT or LXT FPGA is used to control the analog to digital converter and provides the off-board interfaces to either PCI-X or the multi-Gbps serial I/O used for the XMC interface.

The AD1520 is ideal for DSP applications including: Electronic Warfare (EW), Electronic Counter Measures (ECM), Spectral Analysis and Radar

AD3000 3GSPS 8-bit ADC: (from Curtiss-Wright Controls, Inc.)
The AD3000 closely couples a high performance Xilinx Virtex-5 FPGA to a high-speed analog input front end providing both processing and up to 3 GSPS acquisition in a single XMC/PMC card. The combination of a user programmable FPGA, data I/O sub-systems and multiple banks of fast memory provides a powerful platform for acquiring and processing high-speed data in one board. In addition to processing digitized data, the Xilinx Virtex-5 SXT or LXT FPGA is used to control the analog to digital converter and provides the off-board interfaces to either PCI-X or the multi-Gbps serial I/O used for the XMC interface.

The AD3000 is ideal for DSP applications including: Electronic Counter Measures (ECM), Spectral Analysis and Radar.

PMC - ADADIO: (from General Standards Corporation)
The 12-channel PMC-ADADIO analog I/O board provides high-resolution 16-bit analog input, analog output and digital I/ O. Eight analog input channels are sampled simultaneously. The inputs can be sampled continuously or can be burst-sampled (up to 200,000 samples per channel for an aggregate rate of 1,600,000 samples per second). The inputs are converted and stored in a 32,000-sample FIFO buffer. The four analog output channels are accessed through independent registers, and can be updated either synchronously or asynchronously. Inputs and outputs have a factory-configured range of ą10V, ą5V or ą2.5V. A digital port provides eight bi-directional data lines and two control lines

PMC-12AI64: (from General Standards Corporation)
The high-density PMC-12AI64 board provides cost effective 1,500,000 conversions-per-second 12-bit analog input capability in a single width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-12LCAI-64 boards can be connected together for synchronous scanning. Data buffering is configurable either as a single 64K sample FIFO for maximum buffering, or as dual 64K location swinging buffers for minimum latency. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-12AIO: (from General Standards Corporation)
The PMC-12AIO provides a cost effective high-speed 12-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels. A digital I/O port provides 16 bi-directional data lines and two auxiliary I/O lines.

PMC-16AI64: (from General Standards Corporation)
The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16LCAI-64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-16AIO: (from General Standards Corporation)
The PMC-16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.

PMC-16AIO88: (from General Standards Corporation)
The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.

PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: --Two 80 or 100 MHz, 14-bit A/D converters --16 channels of multiband digital receivers --5 kHz to 10 MHz output bandwidth for .S = 100 MHz --250 MHz input bandwidth --Ideal for IF sampling --User-configurable Xilinx Virtex-II FPGA --Custom FPGA I/O through P4 PMC connector --Bypass path allows direct capture of A/D data --Front panel clock and sync bus --Synchronization for up to 80 modules (with Model 9190) --Drivers for popular processor board platforms
AD1520 1.5GSPS 8-bit ADC: (from Curtiss-Wright Controls, Inc.)
The AD1520 is a second generation 1.5GSPS ADC XMC module and follows on from the AD1500. The AD1520 uses a newer generation ADC device and key benefits include increase full power bandwidth (from 1.5 to over 2GHz) and general improvement in ENOB, SFDR and SNR.

The AD1520 closely couples a high performance Xilinx Virtex-5 FPGA to a dual channel high-speed analog input front end providing both processing and up to 1.5GSPS acquisition (per channel) in a single XMC/PMC card. The combination of a user programmable FPGA, data I/O sub-systems and multiple banks of fast memory provides a powerful platform for acquiring and processing high-speed data in one board. In addition to processing digitized data, the Xilinx Virtex-5 SXT or LXT FPGA is used to control the analog to digital converter and provides the off-board interfaces to either PCI-X or the multi-Gbps serial I/O used for the XMC interface.

The AD1520 is ideal for DSP applications including: Electronic Warfare (EW), Electronic Counter Measures (ECM), Spectral Analysis and Radar

AD3000 3GSPS 8-bit ADC: (from Curtiss-Wright Controls, Inc.)
The AD3000 closely couples a high performance Xilinx Virtex-5 FPGA to a high-speed analog input front end providing both processing and up to 3 GSPS acquisition in a single XMC/PMC card. The combination of a user programmable FPGA, data I/O sub-systems and multiple banks of fast memory provides a powerful platform for acquiring and processing high-speed data in one board. In addition to processing digitized data, the Xilinx Virtex-5 SXT or LXT FPGA is used to control the analog to digital converter and provides the off-board interfaces to either PCI-X or the multi-Gbps serial I/O used for the XMC interface.

The AD3000 is ideal for DSP applications including: Electronic Counter Measures (ECM), Spectral Analysis and Radar.

PMC - ADADIO: (from General Standards Corporation)
The 12-channel PMC-ADADIO analog I/O board provides high-resolution 16-bit analog input, analog output and digital I/ O. Eight analog input channels are sampled simultaneously. The inputs can be sampled continuously or can be burst-sampled (up to 200,000 samples per channel for an aggregate rate of 1,600,000 samples per second). The inputs are converted and stored in a 32,000-sample FIFO buffer. The four analog output channels are accessed through independent registers, and can be updated either synchronously or asynchronously. Inputs and outputs have a factory-configured range of ą10V, ą5V or ą2.5V. A digital port provides eight bi-directional data lines and two control lines

PMC-12AI64: (from General Standards Corporation)
The high-density PMC-12AI64 board provides cost effective 1,500,000 conversions-per-second 12-bit analog input capability in a single width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-12LCAI-64 boards can be connected together for synchronous scanning. Data buffering is configurable either as a single 64K sample FIFO for maximum buffering, or as dual 64K location swinging buffers for minimum latency. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-12AIO: (from General Standards Corporation)
The PMC-12AIO provides a cost effective high-speed 12-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels. A digital I/O port provides 16 bi-directional data lines and two auxiliary I/O lines.

PMC-16AI64: (from General Standards Corporation)
The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16LCAI-64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-16AIO: (from General Standards Corporation)
The PMC-16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.

PMC-16AIO88: (from General Standards Corporation)
The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.

PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The AD1520 is a second generation 1.5GSPS ADC XMC module and follows on from the AD1500. The AD1520 uses a newer generation ADC device and key benefits include increase full power bandwidth (from 1.5 to over 2GHz) and general improvement in ENOB, SFDR and SNR.

The AD1520 closely couples a high performance Xilinx Virtex-5 FPGA to a dual channel high-speed analog input front end providing both processing and up to 1.5GSPS acquisition (per channel) in a single XMC/PMC card. The combination of a user programmable FPGA, data I/O sub-systems and multiple banks of fast memory provides a powerful platform for acquiring and processing high-speed data in one board. In addition to processing digitized data, the Xilinx Virtex-5 SXT or LXT FPGA is used to control the analog to digital converter and provides the off-board interfaces to either PCI-X or the multi-Gbps serial I/O used for the XMC interface.

The AD1520 is ideal for DSP applications including: Electronic Warfare (EW), Electronic Counter Measures (ECM), Spectral Analysis and Radar
AD3000 3GSPS 8-bit ADC: (from Curtiss-Wright Controls, Inc.)
The AD3000 closely couples a high performance Xilinx Virtex-5 FPGA to a high-speed analog input front end providing both processing and up to 3 GSPS acquisition in a single XMC/PMC card. The combination of a user programmable FPGA, data I/O sub-systems and multiple banks of fast memory provides a powerful platform for acquiring and processing high-speed data in one board. In addition to processing digitized data, the Xilinx Virtex-5 SXT or LXT FPGA is used to control the analog to digital converter and provides the off-board interfaces to either PCI-X or the multi-Gbps serial I/O used for the XMC interface.

The AD3000 is ideal for DSP applications including: Electronic Counter Measures (ECM), Spectral Analysis and Radar.

PMC - ADADIO: (from General Standards Corporation)
The 12-channel PMC-ADADIO analog I/O board provides high-resolution 16-bit analog input, analog output and digital I/ O. Eight analog input channels are sampled simultaneously. The inputs can be sampled continuously or can be burst-sampled (up to 200,000 samples per channel for an aggregate rate of 1,600,000 samples per second). The inputs are converted and stored in a 32,000-sample FIFO buffer. The four analog output channels are accessed through independent registers, and can be updated either synchronously or asynchronously. Inputs and outputs have a factory-configured range of ą10V, ą5V or ą2.5V. A digital port provides eight bi-directional data lines and two control lines

PMC-12AI64: (from General Standards Corporation)
The high-density PMC-12AI64 board provides cost effective 1,500,000 conversions-per-second 12-bit analog input capability in a single width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-12LCAI-64 boards can be connected together for synchronous scanning. Data buffering is configurable either as a single 64K sample FIFO for maximum buffering, or as dual 64K location swinging buffers for minimum latency. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-12AIO: (from General Standards Corporation)
The PMC-12AIO provides a cost effective high-speed 12-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels. A digital I/O port provides 16 bi-directional data lines and two auxiliary I/O lines.

PMC-16AI64: (from General Standards Corporation)
The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16LCAI-64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-16AIO: (from General Standards Corporation)
The PMC-16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.

PMC-16AIO88: (from General Standards Corporation)
The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.

PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The AD3000 closely couples a high performance Xilinx Virtex-5 FPGA to a high-speed analog input front end providing both processing and up to 3 GSPS acquisition in a single XMC/PMC card. The combination of a user programmable FPGA, data I/O sub-systems and multiple banks of fast memory provides a powerful platform for acquiring and processing high-speed data in one board. In addition to processing digitized data, the Xilinx Virtex-5 SXT or LXT FPGA is used to control the analog to digital converter and provides the off-board interfaces to either PCI-X or the multi-Gbps serial I/O used for the XMC interface.

The AD3000 is ideal for DSP applications including: Electronic Counter Measures (ECM), Spectral Analysis and Radar.
PMC - ADADIO: (from General Standards Corporation)
The 12-channel PMC-ADADIO analog I/O board provides high-resolution 16-bit analog input, analog output and digital I/ O. Eight analog input channels are sampled simultaneously. The inputs can be sampled continuously or can be burst-sampled (up to 200,000 samples per channel for an aggregate rate of 1,600,000 samples per second). The inputs are converted and stored in a 32,000-sample FIFO buffer. The four analog output channels are accessed through independent registers, and can be updated either synchronously or asynchronously. Inputs and outputs have a factory-configured range of ą10V, ą5V or ą2.5V. A digital port provides eight bi-directional data lines and two control lines

PMC-12AI64: (from General Standards Corporation)
The high-density PMC-12AI64 board provides cost effective 1,500,000 conversions-per-second 12-bit analog input capability in a single width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-12LCAI-64 boards can be connected together for synchronous scanning. Data buffering is configurable either as a single 64K sample FIFO for maximum buffering, or as dual 64K location swinging buffers for minimum latency. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-12AIO: (from General Standards Corporation)
The PMC-12AIO provides a cost effective high-speed 12-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels. A digital I/O port provides 16 bi-directional data lines and two auxiliary I/O lines.

PMC-16AI64: (from General Standards Corporation)
The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16LCAI-64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-16AIO: (from General Standards Corporation)
The PMC-16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.

PMC-16AIO88: (from General Standards Corporation)
The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.

PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The 12-channel PMC-ADADIO analog I/O board provides high-resolution 16-bit analog input, analog output and digital I/ O. Eight analog input channels are sampled simultaneously. The inputs can be sampled continuously or can be burst-sampled (up to 200,000 samples per channel for an aggregate rate of 1,600,000 samples per second). The inputs are converted and stored in a 32,000-sample FIFO buffer. The four analog output channels are accessed through independent registers, and can be updated either synchronously or asynchronously. Inputs and outputs have a factory-configured range of ą10V, ą5V or ą2.5V. A digital port provides eight bi-directional data lines and two control lines
PMC-12AI64: (from General Standards Corporation)
The high-density PMC-12AI64 board provides cost effective 1,500,000 conversions-per-second 12-bit analog input capability in a single width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-12LCAI-64 boards can be connected together for synchronous scanning. Data buffering is configurable either as a single 64K sample FIFO for maximum buffering, or as dual 64K location swinging buffers for minimum latency. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-12AIO: (from General Standards Corporation)
The PMC-12AIO provides a cost effective high-speed 12-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels. A digital I/O port provides 16 bi-directional data lines and two auxiliary I/O lines.

PMC-16AI64: (from General Standards Corporation)
The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16LCAI-64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-16AIO: (from General Standards Corporation)
The PMC-16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.

PMC-16AIO88: (from General Standards Corporation)
The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.

PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The high-density PMC-12AI64 board provides cost effective 1,500,000 conversions-per-second 12-bit analog input capability in a single width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-12LCAI-64 boards can be connected together for synchronous scanning. Data buffering is configurable either as a single 64K sample FIFO for maximum buffering, or as dual 64K location swinging buffers for minimum latency. Internal auto calibration networks permit calibration to be performed without removing the board from the system.
PMC-12AIO: (from General Standards Corporation)
The PMC-12AIO provides a cost effective high-speed 12-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels. A digital I/O port provides 16 bi-directional data lines and two auxiliary I/O lines.

PMC-16AI64: (from General Standards Corporation)
The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16LCAI-64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-16AIO: (from General Standards Corporation)
The PMC-16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.

PMC-16AIO88: (from General Standards Corporation)
The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.

PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The PMC-12AIO provides a cost effective high-speed 12-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels. A digital I/O port provides 16 bi-directional data lines and two auxiliary I/O lines.
PMC-16AI64: (from General Standards Corporation)
The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16LCAI-64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system.

PMC-16AIO: (from General Standards Corporation)
The PMC-16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.

PMC-16AIO88: (from General Standards Corporation)
The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.

PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The high-density PMC-16AI64 board provides a cost effective 500,000 conversions-per-second 16-bit analog input capability in a single-width PMC format. The inputs are configurable either as 64 single-ended channels or as 32 differential channels, and the input range can be software selectable as ą10V, ą5V or ą2.5V. Scan rates can be controlled from either (a) an internal rate generator, (b) through an external digital input, or (c) by direct software commands. Multiple PMC-16LCAI-64 boards can be connected together for synchronous scanning. A 64K-sample FIFO provides maximum buffering of input data. Internal auto calibration networks permit calibration to be performed without removing the board from the system.
PMC-16AIO: (from General Standards Corporation)
The PMC-16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.

PMC-16AIO88: (from General Standards Corporation)
The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.

PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The PMC-16AIO provides a cost effective high-speed 16-bit analog input/ output and digital I/ O board. Four analog output channels (at 300,000 samples/ sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation. The analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts. Inputs and outputs have a common software selected range of ą10V, ą5V or ą2.5V, and are accessed through independent 32K-sample FIFO buffers. Internal auto-calibration networks permit calibration to be performed without removing the board from the system. Software controlled test configurations include a loop-back mode for monitoring all analog output channels.
PMC-16AIO88: (from General Standards Corporation)
The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.

PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The PMC-16AIO88 is a versatile Multifunction analog I/ O board. The board has 8 analog inputs and 8 analog outputs per board, and supports arbitrary waveform generation. A single 16-Bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000-sample storage FIFO. Up to 250,000 samples per second aggregate output update rates for the 8 D/ A channels. Analog outputs are double-buffered and allow for software or hardware (Synchronized) strobes for output updating. I/ O ranges are ą2.5, ą5.0, and ą10.0 volts. Output FIFO buffers provide up to 16,000-sample capacity. Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without Host CPU intervention.
PMC-16AO12: (from General Standards Corporation)
The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The PMC-16AO12 D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Twelve analog output channels are updated simultaneously from an internal buffer, either at a software-determined rate, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.
PMC-16AO2MF: (from General Standards Corporation)
The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.

PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The PMC-16AO2MF D/A board provides 400KHz-per-channel precision high speed 16-bit analog outputs, and supports arbitrary waveform generation. Two analog output channels are updated independently from an internal buffer, either at software-determined rates, or by an externally supplied clock. Flexible operating modes include continuous, periodic and triggered burst functions, as well as the seamless, dynamic concatenation of waveforms in real-time. Output ranges are supplied as ą10V, ą5V or ą2.5V. Internal auto calibration networks permit periodic calibration to be performed without removing the board or host from the system. This feature produces the optimum calibration situation, in which the board is calibrated in its actual operating environment.
PMC-16HSDI: (from General Standards Corporation)
The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V. 

PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The PMC-16HSDI analog input board provides four or six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 30 KSPS to 1.1M SPS, for a maximum aggregate rate of 4.4 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.
PMC-16VSDI2: (from General Standards Corporation)
The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The PMC-16VSDI2 analog input board provides one or two precision wideband 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board supports a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of wideband acoustic signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. The two sigma-delta analog input channels can be controlled by either of two independent sample clocks, or both can be synchronized and harmonically locked together. Multiple boards can be synchronized together. Sample rates are adjustable from 1.0 KSPS to 5.0 MSPS, for a maximum aggregate rate of 10 MSPS. The input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.
PMC-6SDI: (from General Standards Corporation)
The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.

PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: The 6-channel PMC-6SDI analog input board provides six precision 16-bit Sigma-Delta analog inputs, and requires no external antialiasing filters. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. A FIFO buffer holds up to 64K channel-tagged input samples. Each of the six sigma-delta analog input channels can be controlled by either of two independent sample clocks, and multiple channels can be harmonically locked together. Sample rates are adjustable from 5 KSPS to 220 KSPS per channel, for a maximum aggregate rate of 880 KSPS, and the input range is software selectable as ą1.25V, ą2.5V, ą5V or ą10V.
PMC-Audio: (from SBS Technologies)
General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.

PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: General purpose Soundblaster(TM) compatible audio PMC module. Front or rear-panel I/O.
PMC-UL-GPIO: (from SBS Technologies)
8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.

TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 8 channels of 100 kHz 12-bit A/D, 8 channels of 100 kHz 12-bit DAC, and 16 TTL digital I/O lines. Front I/O support.
TPMC500-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C
TPMC500-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C
TPMC500-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C
TPMC500-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C
TPMC500-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC500-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC500-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC500-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 12 bit A/D conversion; Data acquisition and conversion time up to 10 ĩs without channel / gain change and up to 12.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC501-10: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C
TPMC501-11: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C
TPMC501-12: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C
TPMC501-13: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C

TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; HD50 SCSI-2 type connector in front panel; Operating temperature -40°C to +85°C
TPMC501-20: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC501-21: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; +/- 10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC501-22: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC501-23: (from TEWS TECHNOLGIES GmbH)
32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 32 single ended or 16 differential channels of isolated 16 bit A/D conversion; Data acquisition and conversion time up to 12 ĩs without channel / gain change and up to 14.5 ĩs with channel / gain change; Sequencer allows periodically scanning of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; 0-10V inputs; Programmable gain of 1, 2, 4, 8; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC550-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; DB-25 connector mounted in front panel; Operating temperature -40°C to +85°C
TPMC550-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C
TPMC550-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 8 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset; DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC550-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 4 channels of isolated 12 bit D/A conversion; Settling time to 0.012% max 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC551-10: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C
TPMC551-11: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C

TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; DB-25 female connector mounted in front panel; Operating temperature -40°C to +85°C
TPMC551-20: (from TEWS TECHNOLGIES GmbH)
8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C

TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 8 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C
TPMC551-21: (from TEWS TECHNOLGIES GmbH)
4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C: 4 channels of isolated 16 bit D/A conversion; Settling time to 0.003% typ. 10 ĩs; +/- 10V or 0-10V output; Support of immediate and simultaneous load; Sequencer allows periodically update of enabled channels; Sequence Timer range from 100 ĩs to 6.5 s; Factory calibrated gain and offset, DC/DC converter on board; P14 I/O; Operating temperature -40°C to +85°C