Serial I/O

Home

Vendors

Products

Serial I/O

IP-Xilinx: (from Dynamic Engineering)
User programmable Xilinx based IP with Spartan30. Two 16 bit wide 1K deep synchronous FIFO memories. 9 RS-485 transceivers. 32 MHz. Bus interface. Support Kit available. Parallel or Serial operation. User frequencies supported

PMC Serial: (from Dynamic Engineering)
The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols.

The PMC-Serial is an upgrade and replacement for the PMC-4U. The PMC-Serial features up to 8 UART channels, an SCC, RS485, RS232, RS188, RS423 options for IO. The standard configuration has 4 UART channels and 2 SCC channels. The UART is supported with 128 Deep FIFO per channel and performance logic for effecient operation on the PCI bus.

PMC Spacewire: (from Dynamic Engineering)
Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high speed parallel paths.
The PMC SpaceWire is easy to use. Point and shoot - just fill the FIFO and set the start bit to get your custom protocol transmitting. Built in loop-back capabilities and engineering kits help with integration into your system. Windows driver available. Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high-speed parallel paths.
http://www.dyneng.com/pmc_SpaceWire.html

PMC-BiSerial: (from Dynamic Engineering)
PMC-BiSerial Independent Input & Output serial channels. RS485/RS422 Up to 12 Mbits/s programmable rates. 16K FIFO per channel. Interrupts at the end of transmission or reception. Programmable FIFO level interrupts for continuous data transfer support. 20 programmable IO. Programmable termination. Custom interface requirements welcomed.

PMC-BiSerial III: (from Dynamic Engineering)
The PMC BiSerial family has been updated to include a Spartan III [Xilinx] based card with expanded capabilities.. Building on the knowledge and experience gathered from multiple IP and PMC BiSerial implementations and adding in the latest technology has created the PMC-BiSerial-III. The BiSerial III features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. The [34] RS-485 / LVDS buffers have programmable termination, and direction control. Half-Duplex, Full-Duplex and single ended systems can be configured with software and VHDL. The denser, faster FPGA will implement the most complex state-machines.

PMC-BiSerial-II: (from Dynamic Engineering)
PMC-BiSerial II Faster, Stronger & more Robust with the latest technology
Take Advantage of these enhanced PMC-BiSerial II features Larger FIFOs -now up to 128Kx32 32 Differential IO increased from 20 40 MHz IO increased from 12.5 MHz. Driver support for NT, XP, 2000 and Linux 3-4X larger Xilinx with room for new features Faster FIFOs - new 32 bit ports on both sides Small FIFO capability within Xilinx for extra channels Enhanced Architecture with 2 RX, 2 TX or mixed channels for more accurate timing and special requirements Need customized features? email you requirements to dedra@dyneng.com

PMC-BiSerial-II-NG1: (from Dynamic Engineering)
Take Advantage of these PMC-BiSerial II-NG1 features UART channels are each supported by a 32K by 32-bit FIFO (FIFO´s up to 128Kx32 available) Independent channels TX/RX, programmable rates, 32 transceivers, programmable terminations, 40 MHz capable RS485 interface, FIFO memory, 33/32 PCI. Optional oscillator

PMC-BiSerial-II-NVY1: (from Dynamic Engineering)
PMC BiSerial II features plus the NVY1 protocol implemented provides redundant Manchester encoded data inputs & outputs. -128 FIFO option utilized. Additional 2 UART´s provided

PMC-BiSerial-S311: (from Dynamic Engineering)
The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.

PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: User programmable Xilinx based IP with Spartan30. Two 16 bit wide 1K deep synchronous FIFO memories. 9 RS-485 transceivers. 32 MHz. Bus interface. Support Kit available. Parallel or Serial operation. User frequencies supported
PMC Serial: (from Dynamic Engineering)
The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols.

The PMC-Serial is an upgrade and replacement for the PMC-4U. The PMC-Serial features up to 8 UART channels, an SCC, RS485, RS232, RS188, RS423 options for IO. The standard configuration has 4 UART channels and 2 SCC channels. The UART is supported with 128 Deep FIFO per channel and performance logic for effecient operation on the PCI bus.

PMC Spacewire: (from Dynamic Engineering)
Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high speed parallel paths.
The PMC SpaceWire is easy to use. Point and shoot - just fill the FIFO and set the start bit to get your custom protocol transmitting. Built in loop-back capabilities and engineering kits help with integration into your system. Windows driver available. Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high-speed parallel paths.
http://www.dyneng.com/pmc_SpaceWire.html

PMC-BiSerial: (from Dynamic Engineering)
PMC-BiSerial Independent Input & Output serial channels. RS485/RS422 Up to 12 Mbits/s programmable rates. 16K FIFO per channel. Interrupts at the end of transmission or reception. Programmable FIFO level interrupts for continuous data transfer support. 20 programmable IO. Programmable termination. Custom interface requirements welcomed.

PMC-BiSerial III: (from Dynamic Engineering)
The PMC BiSerial family has been updated to include a Spartan III [Xilinx] based card with expanded capabilities.. Building on the knowledge and experience gathered from multiple IP and PMC BiSerial implementations and adding in the latest technology has created the PMC-BiSerial-III. The BiSerial III features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. The [34] RS-485 / LVDS buffers have programmable termination, and direction control. Half-Duplex, Full-Duplex and single ended systems can be configured with software and VHDL. The denser, faster FPGA will implement the most complex state-machines.

PMC-BiSerial-II: (from Dynamic Engineering)
PMC-BiSerial II Faster, Stronger & more Robust with the latest technology
Take Advantage of these enhanced PMC-BiSerial II features Larger FIFOs -now up to 128Kx32 32 Differential IO increased from 20 40 MHz IO increased from 12.5 MHz. Driver support for NT, XP, 2000 and Linux 3-4X larger Xilinx with room for new features Faster FIFOs - new 32 bit ports on both sides Small FIFO capability within Xilinx for extra channels Enhanced Architecture with 2 RX, 2 TX or mixed channels for more accurate timing and special requirements Need customized features? email you requirements to dedra@dyneng.com

PMC-BiSerial-II-NG1: (from Dynamic Engineering)
Take Advantage of these PMC-BiSerial II-NG1 features UART channels are each supported by a 32K by 32-bit FIFO (FIFO´s up to 128Kx32 available) Independent channels TX/RX, programmable rates, 32 transceivers, programmable terminations, 40 MHz capable RS485 interface, FIFO memory, 33/32 PCI. Optional oscillator

PMC-BiSerial-II-NVY1: (from Dynamic Engineering)
PMC BiSerial II features plus the NVY1 protocol implemented provides redundant Manchester encoded data inputs & outputs. -128 FIFO option utilized. Additional 2 UART´s provided

PMC-BiSerial-S311: (from Dynamic Engineering)
The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.

PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols.

The PMC-Serial is an upgrade and replacement for the PMC-4U. The PMC-Serial features up to 8 UART channels, an SCC, RS485, RS232, RS188, RS423 options for IO. The standard configuration has 4 UART channels and 2 SCC channels. The UART is supported with 128 Deep FIFO per channel and performance logic for effecient operation on the PCI bus.
PMC Spacewire: (from Dynamic Engineering)
Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high speed parallel paths.
The PMC SpaceWire is easy to use. Point and shoot - just fill the FIFO and set the start bit to get your custom protocol transmitting. Built in loop-back capabilities and engineering kits help with integration into your system. Windows driver available. Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high-speed parallel paths.
http://www.dyneng.com/pmc_SpaceWire.html

PMC-BiSerial: (from Dynamic Engineering)
PMC-BiSerial Independent Input & Output serial channels. RS485/RS422 Up to 12 Mbits/s programmable rates. 16K FIFO per channel. Interrupts at the end of transmission or reception. Programmable FIFO level interrupts for continuous data transfer support. 20 programmable IO. Programmable termination. Custom interface requirements welcomed.

PMC-BiSerial III: (from Dynamic Engineering)
The PMC BiSerial family has been updated to include a Spartan III [Xilinx] based card with expanded capabilities.. Building on the knowledge and experience gathered from multiple IP and PMC BiSerial implementations and adding in the latest technology has created the PMC-BiSerial-III. The BiSerial III features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. The [34] RS-485 / LVDS buffers have programmable termination, and direction control. Half-Duplex, Full-Duplex and single ended systems can be configured with software and VHDL. The denser, faster FPGA will implement the most complex state-machines.

PMC-BiSerial-II: (from Dynamic Engineering)
PMC-BiSerial II Faster, Stronger & more Robust with the latest technology
Take Advantage of these enhanced PMC-BiSerial II features Larger FIFOs -now up to 128Kx32 32 Differential IO increased from 20 40 MHz IO increased from 12.5 MHz. Driver support for NT, XP, 2000 and Linux 3-4X larger Xilinx with room for new features Faster FIFOs - new 32 bit ports on both sides Small FIFO capability within Xilinx for extra channels Enhanced Architecture with 2 RX, 2 TX or mixed channels for more accurate timing and special requirements Need customized features? email you requirements to dedra@dyneng.com

PMC-BiSerial-II-NG1: (from Dynamic Engineering)
Take Advantage of these PMC-BiSerial II-NG1 features UART channels are each supported by a 32K by 32-bit FIFO (FIFO´s up to 128Kx32 available) Independent channels TX/RX, programmable rates, 32 transceivers, programmable terminations, 40 MHz capable RS485 interface, FIFO memory, 33/32 PCI. Optional oscillator

PMC-BiSerial-II-NVY1: (from Dynamic Engineering)
PMC BiSerial II features plus the NVY1 protocol implemented provides redundant Manchester encoded data inputs & outputs. -128 FIFO option utilized. Additional 2 UART´s provided

PMC-BiSerial-S311: (from Dynamic Engineering)
The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.

PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high speed parallel paths.
The PMC SpaceWire is easy to use. Point and shoot - just fill the FIFO and set the start bit to get your custom protocol transmitting. Built in loop-back capabilities and engineering kits help with integration into your system. Windows driver available. Utilize SpaceWire to communicate with the European Space Agency and NASA equipment utilizing the ECSS-E-50-12A specification. SpaceWire is configured using routers to create a hierarchical point-to-point system with high-speed parallel paths.
http://www.dyneng.com/pmc_SpaceWire.html
PMC-BiSerial: (from Dynamic Engineering)
PMC-BiSerial Independent Input & Output serial channels. RS485/RS422 Up to 12 Mbits/s programmable rates. 16K FIFO per channel. Interrupts at the end of transmission or reception. Programmable FIFO level interrupts for continuous data transfer support. 20 programmable IO. Programmable termination. Custom interface requirements welcomed.

PMC-BiSerial III: (from Dynamic Engineering)
The PMC BiSerial family has been updated to include a Spartan III [Xilinx] based card with expanded capabilities.. Building on the knowledge and experience gathered from multiple IP and PMC BiSerial implementations and adding in the latest technology has created the PMC-BiSerial-III. The BiSerial III features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. The [34] RS-485 / LVDS buffers have programmable termination, and direction control. Half-Duplex, Full-Duplex and single ended systems can be configured with software and VHDL. The denser, faster FPGA will implement the most complex state-machines.

PMC-BiSerial-II: (from Dynamic Engineering)
PMC-BiSerial II Faster, Stronger & more Robust with the latest technology
Take Advantage of these enhanced PMC-BiSerial II features Larger FIFOs -now up to 128Kx32 32 Differential IO increased from 20 40 MHz IO increased from 12.5 MHz. Driver support for NT, XP, 2000 and Linux 3-4X larger Xilinx with room for new features Faster FIFOs - new 32 bit ports on both sides Small FIFO capability within Xilinx for extra channels Enhanced Architecture with 2 RX, 2 TX or mixed channels for more accurate timing and special requirements Need customized features? email you requirements to dedra@dyneng.com

PMC-BiSerial-II-NG1: (from Dynamic Engineering)
Take Advantage of these PMC-BiSerial II-NG1 features UART channels are each supported by a 32K by 32-bit FIFO (FIFO´s up to 128Kx32 available) Independent channels TX/RX, programmable rates, 32 transceivers, programmable terminations, 40 MHz capable RS485 interface, FIFO memory, 33/32 PCI. Optional oscillator

PMC-BiSerial-II-NVY1: (from Dynamic Engineering)
PMC BiSerial II features plus the NVY1 protocol implemented provides redundant Manchester encoded data inputs & outputs. -128 FIFO option utilized. Additional 2 UART´s provided

PMC-BiSerial-S311: (from Dynamic Engineering)
The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.

PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PMC-BiSerial Independent Input & Output serial channels. RS485/RS422 Up to 12 Mbits/s programmable rates. 16K FIFO per channel. Interrupts at the end of transmission or reception. Programmable FIFO level interrupts for continuous data transfer support. 20 programmable IO. Programmable termination. Custom interface requirements welcomed.
PMC-BiSerial III: (from Dynamic Engineering)
The PMC BiSerial family has been updated to include a Spartan III [Xilinx] based card with expanded capabilities.. Building on the knowledge and experience gathered from multiple IP and PMC BiSerial implementations and adding in the latest technology has created the PMC-BiSerial-III. The BiSerial III features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. The [34] RS-485 / LVDS buffers have programmable termination, and direction control. Half-Duplex, Full-Duplex and single ended systems can be configured with software and VHDL. The denser, faster FPGA will implement the most complex state-machines.

PMC-BiSerial-II: (from Dynamic Engineering)
PMC-BiSerial II Faster, Stronger & more Robust with the latest technology
Take Advantage of these enhanced PMC-BiSerial II features Larger FIFOs -now up to 128Kx32 32 Differential IO increased from 20 40 MHz IO increased from 12.5 MHz. Driver support for NT, XP, 2000 and Linux 3-4X larger Xilinx with room for new features Faster FIFOs - new 32 bit ports on both sides Small FIFO capability within Xilinx for extra channels Enhanced Architecture with 2 RX, 2 TX or mixed channels for more accurate timing and special requirements Need customized features? email you requirements to dedra@dyneng.com

PMC-BiSerial-II-NG1: (from Dynamic Engineering)
Take Advantage of these PMC-BiSerial II-NG1 features UART channels are each supported by a 32K by 32-bit FIFO (FIFO´s up to 128Kx32 available) Independent channels TX/RX, programmable rates, 32 transceivers, programmable terminations, 40 MHz capable RS485 interface, FIFO memory, 33/32 PCI. Optional oscillator

PMC-BiSerial-II-NVY1: (from Dynamic Engineering)
PMC BiSerial II features plus the NVY1 protocol implemented provides redundant Manchester encoded data inputs & outputs. -128 FIFO option utilized. Additional 2 UART´s provided

PMC-BiSerial-S311: (from Dynamic Engineering)
The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.

PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC BiSerial family has been updated to include a Spartan III [Xilinx] based card with expanded capabilities.. Building on the knowledge and experience gathered from multiple IP and PMC BiSerial implementations and adding in the latest technology has created the PMC-BiSerial-III. The BiSerial III features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. The [34] RS-485 / LVDS buffers have programmable termination, and direction control. Half-Duplex, Full-Duplex and single ended systems can be configured with software and VHDL. The denser, faster FPGA will implement the most complex state-machines.
PMC-BiSerial-II: (from Dynamic Engineering)
PMC-BiSerial II Faster, Stronger & more Robust with the latest technology
Take Advantage of these enhanced PMC-BiSerial II features Larger FIFOs -now up to 128Kx32 32 Differential IO increased from 20 40 MHz IO increased from 12.5 MHz. Driver support for NT, XP, 2000 and Linux 3-4X larger Xilinx with room for new features Faster FIFOs - new 32 bit ports on both sides Small FIFO capability within Xilinx for extra channels Enhanced Architecture with 2 RX, 2 TX or mixed channels for more accurate timing and special requirements Need customized features? email you requirements to dedra@dyneng.com

PMC-BiSerial-II-NG1: (from Dynamic Engineering)
Take Advantage of these PMC-BiSerial II-NG1 features UART channels are each supported by a 32K by 32-bit FIFO (FIFO´s up to 128Kx32 available) Independent channels TX/RX, programmable rates, 32 transceivers, programmable terminations, 40 MHz capable RS485 interface, FIFO memory, 33/32 PCI. Optional oscillator

PMC-BiSerial-II-NVY1: (from Dynamic Engineering)
PMC BiSerial II features plus the NVY1 protocol implemented provides redundant Manchester encoded data inputs & outputs. -128 FIFO option utilized. Additional 2 UART´s provided

PMC-BiSerial-S311: (from Dynamic Engineering)
The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.

PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PMC-BiSerial II Faster, Stronger & more Robust with the latest technology
Take Advantage of these enhanced PMC-BiSerial II features Larger FIFOs -now up to 128Kx32 32 Differential IO increased from 20 40 MHz IO increased from 12.5 MHz. Driver support for NT, XP, 2000 and Linux 3-4X larger Xilinx with room for new features Faster FIFOs - new 32 bit ports on both sides Small FIFO capability within Xilinx for extra channels Enhanced Architecture with 2 RX, 2 TX or mixed channels for more accurate timing and special requirements Need customized features? email you requirements to dedra@dyneng.com
PMC-BiSerial-II-NG1: (from Dynamic Engineering)
Take Advantage of these PMC-BiSerial II-NG1 features UART channels are each supported by a 32K by 32-bit FIFO (FIFO´s up to 128Kx32 available) Independent channels TX/RX, programmable rates, 32 transceivers, programmable terminations, 40 MHz capable RS485 interface, FIFO memory, 33/32 PCI. Optional oscillator

PMC-BiSerial-II-NVY1: (from Dynamic Engineering)
PMC BiSerial II features plus the NVY1 protocol implemented provides redundant Manchester encoded data inputs & outputs. -128 FIFO option utilized. Additional 2 UART´s provided

PMC-BiSerial-S311: (from Dynamic Engineering)
The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.

PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Take Advantage of these PMC-BiSerial II-NG1 features UART channels are each supported by a 32K by 32-bit FIFO (FIFO´s up to 128Kx32 available) Independent channels TX/RX, programmable rates, 32 transceivers, programmable terminations, 40 MHz capable RS485 interface, FIFO memory, 33/32 PCI. Optional oscillator
PMC-BiSerial-II-NVY1: (from Dynamic Engineering)
PMC BiSerial II features plus the NVY1 protocol implemented provides redundant Manchester encoded data inputs & outputs. -128 FIFO option utilized. Additional 2 UART´s provided

PMC-BiSerial-S311: (from Dynamic Engineering)
The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.

PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PMC BiSerial II features plus the NVY1 protocol implemented provides redundant Manchester encoded data inputs & outputs. -128 FIFO option utilized. Additional 2 UART´s provided
PMC-BiSerial-S311: (from Dynamic Engineering)
The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.

PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-BiSerial-S311 implements the Northrop Grumman S-311 interface protocol. This protocol uses a burst clock to shift 18 bits of data. The data changes on the rising edge of the clock and is valid on the falling edge. The first bit is the sync bit, which is always high and the next 8 bits are the upper byte of the data shifted out MSB first. The next bit is the mode bit, which is zero for a data word and one for a command word. The final 8 bits are the lower byte of data shifted out MSB first.
PMC-Parallel-TTL: (from Dynamic Engineering)
The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.

PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC compatible PMC-Parallel-TTL has 64 independent digital IO. The high density makes efficient use of precious PMC slot resources. The IO is available for system connection both through the front panel and via the rear [Pn4] connector. A high density 68 pin SCSI III front panel connector provides the front panel IO. The rear panel IO has a PIM and PIM Carrier available for rear panel wiring options. The HDEterm68 can be used as a breakout for the front or rear panel IO. The HDEcabl68 provides a convenient cable. The pin definitions are consistent with the PMC Parallel IO card to enable users of the PMC Parallel IO to migrate to the PMC Parallel TTL quickly and easily.
A multitude of ordering options to fit your specific requirements are available.
PMC-Serial/PMC-4U: (from Dynamic Engineering)
The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.

TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-4U provides a highly flexible communications interface with synchronous and asynchronous serial protocols. The features of the PMC_4U have been incorporated into the PMC-Serial design. PMC-Serial The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols. UART and SCC

Replace several cards with one to save time, cards, slots and dollars.

The PMC-Serial is capable of providing multiple serial protocols, both synchronous and asynchronous with a wide range of baud rates. The PMC-Serial has up to 8 UART channels, and two SCC channels. The protocol processors are complemented with a variety of IO which can be selected as a build option. RS-232, RS-485, RS-422, and RS-423 are supported. Two enhanced hysteresis MIL STD 188-114A receivers, and two open drain active low output drivers are also provided. The PMC-Serial also has a wide range of IO drivers and receivers to interface with. The SCC and UART IO are tied to the Xilinx and then back to the IO to allow for programmable options and ease of customerization.
TPMC461-12: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 Channel Serial RS232 / 4 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
2012 -- 4-port Async Communications Adapter: (from Technobox, Inc.)
4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.

2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4-port Async Comm Adapter. Front and Rear I/O. Ports configured for RS232, RS422 or RS485 operation in any mix. Standard baud rates to 115Kbaud. 16550 UARTs. MicroD9 connectors on Front Panel.
2229 -- 8-port Async Communications Adapter: (from Technobox, Inc.)
8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.

2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8-port Async Comm Adapter. Front and Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 8 x DB9 breakout panel available.
2238 -- 16-port Async Communications Adapter: (from Technobox, Inc.)
16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.

2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 16-port Async Comm Adapter. Front/Rear I/O. RS232 levels. Rates to 115Kbaud using 16550 UARTS. 16 x RJ11 Breakout panel available.
2316 -- 8-port RS422 Async Communications Adapter: (from Technobox, Inc.)
8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.

2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8-port RS422 Asynchronous Communication Adapter. TXD, RXD, CTS, RTS on each of 8 ports. 16550 UARTs. Supports rear and front panel I/O. On board 150 ohm termination.
2876 -- 16-port RS485/422 Async Comm Adapter: (from Technobox, Inc.)
16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.

2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 16 ports of 16550 UART based RS485 Async Communications. Rear or Front panel I/O. Option for on-board termination. Standard baud rates to 115Kbaud. Transient suppression on all RS485 lines.
2901 -- 2-port RS232/422/485 Async Comm Adapter: (from Technobox, Inc.)
Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.

3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Two 16550 based ports independently user configurable for RS232, RS422 or RS485 operation. Standard DB9 Male connectors out front panel. Baud rates to 115 Kbaud.
3101 -- 4-port RS232 / 4-port RS422 Async Comm: (from Technobox, Inc.)
8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.

CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8-port Asynchronous Communication Adapter. Provides eight (8) 16550-based ports, with four (4) using RS232 signaling levels and four (4) using RS422 levels. Standard baud rates to 115Kbaud. Support for both front and rear I/O.
CC PMC/232: (from Concurrent Technologies)
4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.

CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 x RS232 PC compatible multi-serial comms and parallel printer interface. The board uses two National Semiconductor Super I/O controllers which support asynchronous datarates up to 115kbaud with full modem control on each of the four communications channels. In addition a single parallel printer interface is provided which is EPP, ECP and IEEE 1284 compatible. The serial channels and printer interface are accessed through a single connector on the front of the PMC module - a breakout adaptor is used to convert to industry standard connectors. A 64kbyte Flash EPROM is also provided.
CC PMC/422: (from Concurrent Technologies)
4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.

CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 x RS422/485 PC compatible serial comms controller supporting data rates up to 1.5Mbps. Multi-drop capability is also supported.
CCII 2-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Ultra-low-cost product providing two RS232 ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.
CCII 4-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Four high-speed (> 10 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC I communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.
Various software drivers offered including for VxWorks, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)
CCII 8-Channel High-Speed Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Intelligent I/O adapter offering eight channels of simultaneous, high-speed (> 16 Mbps), bi-directional serial communications plus four UART channels.

Dual onboard Motorola PowerQUICC II communication controllers. Channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)
CCII 8-Channel UART Serial I/O PMC: (from CCII Systems (Pty) Ltd)
Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.

CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Eight channels of simultaneous, bi-directional UART serial communications. Channels configurable as RS232/422/485. Low-cost product providing eight serial ports using industry standard 16550 compatible UART.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit PCI-bus and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

No software drivers are required.
CCII New Generation 4-Channel High-Speed Serial: (from CCII Systems (Pty) Ltd)
Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)

CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Four ultra-high-speed (> 16 Mbps) plus two UART (< 1 Mbps) channels. Intelligent adapter with onboard Motorola PowerQUICC II communication controller. All channels configurable as RS422/485/232. Supported protocols: HDLC, SDLC, Async, BiSync.

Available in conduction-cooled (-40 C to +85 C) and air-cooled versions: ruggedised (-40 C to +85 C), industrial (-15 C to +75 C) and commercial (0 C to +55 C). Conduction-cooled and ruggedised versions are ideally suited for environments with high temperature, shock and vibration levels.

Front-panel and rear connector I/O options with various rear connector PMC Jn4 I/O pin assignments. Conduction-cooled version has rear connector I/O only.

Interfaces to 32-bit, 33/66 MHz PCI-bus using 3,3 V signalling, and complies with PCI Rev. 2.2 specification. Mechanically complies with single CMC formfactor i.a.w. IEEE P1386 specification.

Various software drivers offered including for VxWorks, Linux, Windows NT, Windows 2000* and Windows XP* operating systems as standard; others optional. (*Standard PC HAL only)
CP413: (from GE Fanuc)
6-port IEEE 1394 Firewire

IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 6-port IEEE 1394 Firewire
IC-SER-PMCa: (from Interface Concept)
On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.

NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: On-board MPC860P 65MIPS (130 MIPS available in Q4 2000). 4 high-performance asynch./synch. ports plus one Ethernet 10/100Mbs port available via the MPC860 connector´s MII port. All the serial channels are independently software configurable as RS232, RS422, RS485, EIA530, X21b, V35 or V36. Bit rates up to 120Kbs (V10) and 2Mbs (V11). 2MB FlashEPROM and 16MB shared synchronous DRAM. In-house protocol support : TCP/IP on Ethernet, PPP, BOOTP, TELNET, TFTP, HDLC, HTTP. Applications : AIN, TMN, SS7, LAPD, X25, OSI, FR.
NPMC-860-I/O: (from N.A.T. GmbH)
The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.

NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-860-I/O is a general purpose I/O PMC module. It is based on the Motorola MPC860 "PowerQUICC I" processor and provides all CPU-I/O signals on a high density front panel connector. In addition this module is equipped with up to 16MB DRAM, 4MB Flash, 256KB SRAM and an SCbus controller. The NPMC-860-I/O is ideal for customer specific designs needing flexible I/O configurations. Together with the N.A.T. transition modules access is available to various serial line and networking connectivity standards.
NPMC-860-SIO: (from N.A.T. GmbH)
The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.

PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The NPMC-860-SIO is an intelligent PMC module with the Motorola MPC860 PowerPC CPU and four serial I/O ports. This module is equipped with up to 16 MByte DRAM, 4 MByte FLASHProm and 256KB SRAM. Software support is offered for VxWorks and the N.A.T. proprietary Real-Time Kernel OK-1. The four SCC channels as well as the two SMC channels of the MPC860 are connected to the front panel connectors by serial tranceivers, which optionally can form RS232, RS422 and/or RS485 interfaces. All ports may be optically isolated separately. Alternatively all signals of the Sccs, SMCs, the SPI- and the I2C ports are available on the PMC I/O connector.
PMC-3210: (from SBS Technologies)
PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.

PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PMC Module with Four Full-Duplex Serial Channels. Up to four synchronous or asynchronous full duplex serial ports(ESCC). Two Z85230. Direct replacement for SciTech SciCom module (without DMA). Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4. Direct PCI bus interface. 32-bit, 33 MHz, bus slave operation only.
PMC-3211: (from SBS Technologies)
PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.

PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PMC Module with Four Serial Channels with DMA. Direct replacement for SciTech SciCom module(with DMA). Four full-duplex serial communication channels. Asynchronous transfers from 50 bps - 125 Kbps. Factory configurable for RS-232 or RS-422. I/O via front panel or backpanel P4.
PMC-HPDI32-ASYNC: (from General Standards Corporation)
The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-HPDI32-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.
PMC-HPDI32-DIPHASE: (from General Standards Corporation)
The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-HPDI32-DIPHASE is a full-duplex RS-422/ 485 serial I/ O board. Each channel can operate up to 10M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed di-phase transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.
PMC-HPDI32A-TELEM: (from General Standards Corporation)
The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.

PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-HPDI32A-TELEM is a full-duplex RS-422/ 485 telemetry serial I/ O board. Each channel can operate up to 10M bits/s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provide for a smooth and efficient interface between the serial interfaces and the host computer. The high-speed telemetry transmit/ receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface.
PMC-HS Serial: (from SBS Technologies)
Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.

PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Quad Channel High Speed Serial Module for data communications, LAN/WAN, and telecommunications. 10 Mbit/sec synchronous, 2 Mbit/sec asynchronous. Asynchronous, monosync, bisync, HDLC, SDLC, LAPB, LAPD, ISDN, PPP. RS-232, RS-422, EIA-449, EIA-530, V.35. Deep FIFOs and 8 DMA controllers.
PMC-MPSIO4: (from General Standards Corporation)
The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.

PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-MPSIO4 board is a low cost 4-Channel UART with software selectable Serial I/ O cable interface transceivers. Each channel can be software configured for RS-232, RS-422A, RS-449, RS-485, V.35, EIA-530, EIA-530A and V.36. The board can support up to 10 Mbits/sec for differential interfaces and 120 Kbps for single ended operation. Each transmitter and receiver has a 128 byte deep FIFO. The board is fully software compatible with 16C550 family of UARTs. The Serial I/O is through the front panel.
PMC-Octal Pro: (from SBS Technologies)
8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.

PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of asynchronous RS-232 or RS-422, with 128 KB FIFO per channel per direction. Up to 460.8k baud. Front and back I/O Support.
PMC-Octal Pro-232: (from SBS Technologies)
PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.

PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PMC Module with 8 RS-232 UART channels. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 230 Kbaud.
PMC-Octal Pro-422: (from SBS Technologies)
PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.

PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: PMC Module with 8 RS-422 UART channels with FIFO. ESD protected with 64 byte FIFO on each transmit and receive channel. Up to 460.8 Kbaud.
PMC-SIO4: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..

PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-SIO4 is a four channel full-duplex RS-422/ 485 serial board. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface..
PMC-SIO4-232: (from General Standards Corporation)
The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.

PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-SIO4 is a four channel full-duplex RS-232 serial board which is software compatible with the PMC-SIO4. Each channel can operate up to 1 Mbit/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel. The board is based on the Zilog Z16C30 high speed Integrated Universal Serial Controller (USC) which supports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface. Both VxWorks and Windows NT drivers are available.
PMC-SIO4AR: (from General Standards Corporation)
The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.

PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-SIO4AR is a four channel full-duplex RS-422/ 485 serial board with Rear I/O. Each channel can operate up to 10 Mbits/ s. Optional 32 Kbyte FIFO buffer for both transmit and receive (256 Kbytes Total FIFOs) data on each channel provides for a smooth and efficient interface between the serial interfaces and the PMC host computer. The board is based on the Zilog� Z16C30� high speed Integrated Universal Serial Controller (USC) which sup-ports Asynchronous, Isochronous, Bisync, Monosync, HDLC, SDLC, External Sync and Nine-Bit protocols. The USC chip provides full duplex operation with baud rate generators, digital phase-locked loop for clock recovery and a full duplex DMA interface.
PMC-Sweet16: (from SBS Technologies)
16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.

PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 16 channels of high speed RS-232, with 22 fixed asynchonous baud rate, from 50 to 230.4k. Front and back I/O support.
PMC413: (from GE Fanuc)
3-port IEEE1394 Firewire

PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 3-port IEEE1394 Firewire
PMC4U - synchronous and asynchronous protocals:: (from Dynamic Engineering)
The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.

RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The PMC-4U features the Exar 854 quad UART and Zilog 85X30 Serial Communications Controller. The PMC-4U utilizes a Xilinx FPGA to provide a 33/32 PCI interface and control for the UART and SCC. The IO from the Quad UART and Serial Communications Controller are routed through the FPGA to provide a multiplexer capability with the IO options onboard. The PMC-4U supports RS232, RS485, RS423 and RS188. The PMC-4U has options for the UART and SCC reference frequencies, and the capability of adding a reference oscillator to the Xilinx for custom state machine requirements. Perfect for your embedded control applications! A high-density 68 pin SCSI III front panel connector and backplane IO provide system wiring options.
RM413: (from GE Fanuc)
6-port IEEE 1394 Firewire

SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 6-port IEEE 1394 Firewire
SFM Quad Serial FPDP XMC/PMC: (from Curtiss-Wright Controls, Inc.)
The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host

TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: The SFM uses highly integrated FPGA technology to provide 1, 2 or 4 channels of fast, low latency point-to-point ANSI/VITA 17.1-2003 serial FPDP (sFPDP) in an XMC/PMC module. Each independent channel supports the standard sustained sFPDP data rates of 1.0625Gbps (105Mbytes/s), 2.125Gbps (210Mbytes/s) and 2.5Gbps (247Mbytes/s) through front panel fiber optic transceivers. Each channel may be operated as a sFPDP transmitter or receiver. Smooth dataflow is ensured using a 256Mbytes pool of DDR2 SDRAM to provide each datastream with 64Mbytes of FIFO buffering.

An FPGA based PCI Express (PCIe) x4 core provides the module with a host interface through the XMC connector. Each PCIe supports data rates of 2.5Gbps, bidirectionally.

* two or four 2.5Gbps fiber optic transceivers fitted as standard
* Supports 1.0625, 2.125 and 2.5Gbps serial data rates
* 64Mbytes DDR2 SDRAM buffering per channel
* PMC supports 133MHz PCI-X
* XMC supports 2.5 Gbps PCI Express
* Link speed is field configurable
* All serial FPDP operational topologies are supported including: simple point-to-point data streams, copy and copy/loop modes
* Windows 2000/XP, VxWorks and Linux support
* High bandwidth PCI Express host interface through XMC connector
* Four independant point-to-point data streams to the host
TPMC362-20: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C

TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Conduction Cooled PMC based on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; P14 I/O; Operating temperature -40�C to +85�C
TPMC371-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Conduction Cooled PMC; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC371-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Conduction Cooled PMC; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC371-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Conduction Cooled PMC with 4 Ch. Serial RS232 / 4 Ch. Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC372-10: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Conduction Cooled PMC; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC372-11: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Conduction Cooled PMC; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC372-12: (from TEWS TECHNOLGIES GmbH)
Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Conduction Cooled PMC with 2 Ch. Serial RS232 / 2 Ch. Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC375-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Conduction cooled PMC Module with 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C
TPMC376-10: (from TEWS TECHNOLGIES GmbH)
Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: Conduction cooled PMC Module with 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C
TPMC460-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 16 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC460-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 16 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud ; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC460-12: (from TEWS TECHNOLGIES GmbH)
8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 Channel Serial RS232 / 8 Channel Serial RS422; 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC460-13: (from TEWS TECHNOLGIES GmbH)
12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 12 Channel Serial RS232 / 4 Channel Serial RS422; 12 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC460-14: (from TEWS TECHNOLGIES GmbH)
4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 Channel Serial RS232 / 12 Channel Serial RS422; 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS and CTS per channel; 12 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/- and TxD+/- per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD68 SCSI-3 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC461-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC461-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC462-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC462-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 1 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC462-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 1 channel with full modem support; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC463-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC463-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC463-12: (from TEWS TECHNOLGIES GmbH)
2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C

TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 2 Channel Serial RS232 / 2 Channel Serial RS422; 2 channels of high performance RS232 serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, DCR, DCD, DSR/RI and GND per channel; 2 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; 4 RJ45 connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40�C to +85�C
TPMC465-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Octal UART: Exar XR17D158; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C
TPMC466-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C

TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 channels of high performance RS232/RS422/RS485 programmable serial interface; Programmable baud rates: RS232: up to 921.6 kbps, RS422/RS485: up to 5.5296 Mbps; Quad UART: Exar XR17D154; Programmable Interfaces: RS232, RS422, RS485 full duplex, RS485 half duplex; Programmable Termination for RS422/RS485; Support of RxD, TxD, RTS, CTS and GND for each RS232 channel; RxD+/-, TxD+/- and GND for each RS422/RS485 FD channel; D+/- and GND for each RS485 HD channel; 64 byte transmit FIFO per channel, 64 byte receive FIFO per channel, Readable FIFO levels; Global Interrupt Source Register; General Purpose 16 bit Timer/Counter; ESD protected transceiver (up to � 15KV); Operating temperature -40�C to +85�C
TPMC860-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 isolated channels of high performance RS232 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C
TPMC861-10: (from TEWS TECHNOLGIES GmbH)
4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 isolated channels of high performance RS422 / RS485 serial interface; Each channel isolated from system and the other channels by optocoupler and onboard DC/DC converter; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C
TPMC862-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 Channel High Speed Synch/Asynch Serial, InterfaceBased on Infineon PEF20534 DMA Supported Serial Communication Controller (DSCC4); Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical inerface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C
TPMC863-10: (from TEWS TECHNOLGIES GmbH)
4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4 Channel High Speed Synch/Asynch Serial PMC Module: FPGA based DMA supported Serial Communication Controller; Support of RxD, TxD, RxC, TxC, RTS, CTS, CD and GND per channel; 3 on board clock sources; several clock options programmable; maximum data rates up to 10 Mbit/s; Physical interface programmable per channel: EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 and X.21; HD68 SCSI-3 type female connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C
TPMC866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C
TPMC866-10-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C
TPMC866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C
TPMC866-11-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C
TPMC866-12: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature 0�C to +70�C
TPMC866-12-ET: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 8 channels of high performance RS422 / RS485 serial interface; interface and termination configurable by jumper; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/- and GND per RS422 channel or of Dx+/- and GND per RS485 channel; 128 byte receive FIFO and 128 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 / RS485 line driver/receiver up to 15KV according to IEC1000-4-2; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; Operating temperature -40�C to +85�C
TPMC868-10: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C
TPMC868-10-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 16 channels of high performance RS232 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C
TPMC868-11: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C

TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature 0�C to +70�C
TPMC868-11-ET: (from TEWS TECHNOLGIES GmbH)
16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C

TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 16 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Support of RxD+/-, TxD+/-, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; all signals on HD68 SCSI-3 type connector in front panel and P14 I/O; Operating temperature -40�C to +85�C
TPMC917-10: (from TEWS TECHNOLGIES GmbH)
4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C

wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: 4MB SRAM (512K x 32 bit); Battery Backup by onboard Lithium cell or external battery via P14; Battery monitor with interrupt on battery low; Additional 4 channel RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Support of Rx, Tx, RTS, CTS and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; DB-25 female connector mounted in front panel; Operating temperature 0�C to +70�C
wanPMC-1SSI: (from SBE, Inc.)
SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.

wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: SBE's wanPMC-1SSI is an industry standard PMC card that provides a high performance wide area network (WAN) connection using a wide range of synchronous serial interfaces. When coupled with a PMC carrier card, the wanPMC-1SSI plugs into a 33 MHz slot in routers, switches or servers with a standard PCI bus. It is also well suited for embedded systems designs. The adapter operates at speeds up to 10 Mbps and is ideal for T1/E1 and inverse multiplex or applications. The adapter supports HDLC framing required for Frame Relay and PPP connectivity.
wanPMC-2SSI: (from SBE, Inc.)
SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.

wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: SBE's High Speed Serial Interface Controller providing support for two (2) independent serial channels/ports with data rates up to 8Mbps full-duplex per channel/port. Interfaces available for V.35, X.21, EIA-232D, and EIA-530.
wanPMC-C4T1E1: (from SBE, Inc.)
SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.: SBE's wanPMC-C4T1E1 is a single wide PMC module that combines four full featured front panel accessible T1/E1/J1 ports with a 128 channel communications controller incorporating SS7, HDLC and transparent mode protocol support.
The wanPMC-C4T1E1 is a simple and effective way to reduce your time-to-market for high-density SS7, Frame Relay, LAPD and HDLC requirements in the cPCI, PCI or VME form factors. The wanPMC-C4T1E1 can frame to D4, SF, ESF, SLC-96 and Japanese JT-G704 (J1) frame formats.