 |
|
 |
|
 |
| |
Instrumentation
- AM104 Signal Conditioning M-Module: (from C&H Technologies)
- Signal conditioning modules that plugs onto C&H MA203 digital input instrument. Available with +5V optocoupled, +28V optocoupled, relay contact with current source provided and programmable threshold.
- M205 Pulse Amplifier: (from C&H Technologies)
- The M205 is a programmable pulse amplifier that accepts fixed level inputs and provides variable level outputs up to 25 volts into a 50 ohm load. Triple wide module.
- M206 Pulse Amplifier: (from C&H Technologies)
- The M206 is a programmable pulse amplifier that accepts a fixed level input pulse and provides dual complementary switched outputs.
- M207 Precision Oscillator: (from C&H Technologies)
- The M207 is an ovenized oscillator that provides a stable 10 MHZ source or any frequency resulting from dividing this frequency by N where N is from 2 to 16,383. Output set manually.
- M213 GPS Timing Receiver: (from C&H Technologies)
- The M213 provides GPS timing. Up to 12 satellites may be tracked simultaneously. Provides an accurate and stable 1 or 100 pps output. Position information available
- M214 4 Channel Precision Voltage Source: (from C&H Technologies)
- The M214 provides 4 precision 4 wire voltage sources that are individually optically isolated. Use as references or for thermocouple simulation. Up to +/-10V outputs. 3 Output ranges. 0.188 microvolt resolution on the +/-99mV range.
- M218 16 Channel Form A Switch: (from C&H Technologies)
- The M218 provides 16 independent latching SPST switches. 10 MHz BW, 2A carry current.
- M219 4 x 4 Matrix Switch: (from C&H Technologies)
- The M219 provides 16 independent latching DPST switches configured as a Kelvin (2 wire) 4 x 4 Matrix. BW > 10 MHz, Carry Current is 2A
- M220 Dual 8 x 1 Multiplexer: (from C&H Technologies)
- The M220 (formerly Agilent E2272A) provides 16 independent latching DPST switches configured as dual 8x1 multiplexers or a single 16 x 1 multiplexer. These two wire switches have maskable interrupts that occur when the requested relay movements have been made.
- M221 8 Channel Form C Switch: (from C&H Technologies)
- The M221 (formerly Agilent E2273A) provides 8 independent non-latching SPDT switches with maskable interrupts that occur when the requested relay movements have been made. BW > 10 MHz, Carry Current 1 A.
- M222 4 Channel Form C Power: (from C&H Technologies)
- The M222 (formerly Agilent E2274A) provides 4 independent non-latching SPDT switches with maskable interrupts that occur when the requested relay movements have been made. BW > 10 MHz, Carry current 5 A
- M225 Quad 4 x 1 Multiplexer: (from C&H Technologies)
- The M225 provides 16 independent latching SPST switches configured as four 4 x 1 multiplexers. The switches have maskable interrupts that occur when the requested relay movements have been made. BW > 10 MHz, carry current 2 A.
- M227 Programmable Clock, Counter M-Module: (from C&H Technologies)
- The M227 provides a variety of clock, counter and timer functions, including a number of derived counter outputs and three (3) 32-bit counters. The module has a very flexible architecture that allows extensive user definition of the input and output signals. In addition to producing precision clock signals, the instrument can be used to perform counting, pulse width, period and interval measurements.
- M385 250MHz Universal Counter/Timer M-Module: (from C&H Technologies)
- The M385 is a universal counter/timer M-Module with two (2) measurement channels. It's frequency range is up to 250MHz.
- M76 Digital Multimeter M-Module: (from C&H Technologies)
- The M76 is a full function DMM suitable for use on a variety of platforms with the family of C&H Carriers. This DMM is based upon a 24 bit Sigma-Delta A/D converter with on-chip noch filter
- MA201 High Voltage Sequential Source, 24 Channel: (from C&H Technologies)
- Capable of sequentially driving the 24 channels at levels up to 150V. The module monitors and records, on-the-fly, the high and low voltage levels and the currents being drawn by the high and low drivers. This information is recorded into on-board memory. Double wide.
- MA202 Digital Word & Timing Generator: (from C&H Technologies)
- 16 bit DWG in double wide M-module format for use with C&H's VX405C M-module carrier. The MA202 supports single and continuous cycle modes and rates up to 10MHz and provides 32K words of on-board pattern memory.
- MA203 16 Channel Digital Input M-Module: (from C&H Technologies)
- Sixteen (16) channel Event Detector with sample rates to low MHz range depending on input signal conditioning. 32K time-value sample memory with 31 bit time tag. Programmable masks on inputs and programmable debounce of inputs.Interrupts available for change of state or level transition, bit pattern, data stored, FIFO full and FIFO half full. Signal conditioning available (See AM104).
- MA204 50MHZ Pulse Generator: (from C&H Technologies)
- The MA204 is a full function 50MHZ Pulse Generator with 100 picosecond timing resolution. The PG may be locked to an external reference for added stability.
- MA208 20 MHz Sweeping Function Generator: (from C&H Technologies)
- The MA208 provides fixed or sweeping frequencies from 0 to 20 MHz. Sine, Square, Triangle and DC Level are provided. Linear and Log sweeps. Sweep frequency, amplitude, offset and duty cycle.
- MA209 100MHZ Pulse Generator: (from C&H Technologies)
- The MA209 is a full function 100 MHZ Pulse Generator with 10 picosecond timing resolution. The unit may be locked to an external reference for added stability.
- MA210 Signal Distribution Module: (from C&H Technologies)
- The MA210 provides distribution of clock signals to multiple users. Each of two inputs may go to 1 ECL and 4 TTL outputs or 1 input may be routed to 2 ECL and 8 TTL outputs. Flexible triggering arrangements enable routing of external triggers to either the M Module or backplance accepting triggers. Double wide M Module.
|
|
|
|
|
|
