Special Functions (GPS, Clocks

Home

Vendors

Products

Special Functions (GPS, Clocks

IP-QuadUART: (from Dynamic Engineering)
The IndustryPack compatible IP-QuadUART design integrates a quad UART onto an IndustryPack module. The UART (16C854) features 128 byte FIFOs for RX and TX ports on each channel. The UART is supported by an advanced IP module interface implemented within a Xilinx FPGA.
The UART is a character based interface [8 bits]. The IndustryPack interface has several features which optimize performance. Words can be written to the IP-QuadUART and the data will be converted to bytes before being sent to the UART. The IP interface will latch the data allowing the host computer to be released while the data is being moved to the UART. The early release allows pipelined operation and increased performance. When the IP-QuadUART is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP and PCI5IP support 32 bit access to IndustryPacks.

IP-QuadUART-485: (from Dynamic Engineering)
The IndustryPack compatible IP-QuadUART-485 design integrates a quad UART onto an IndustryPack module. The UART (16C854) features 128 byte FIFOs for RX and TX ports on each channel. The UART is supported by an advanced IP module interface implemented within a Xilinx FPGA.
The UART is a character based interface [8 bits]. The IndustryPack interface has several features which optimize performance. Words can be written to the IP-QuadUART-485 and the data will be coverted to bytes before being sent to the UART. The IP interface will latch the data allowing the host computer to be released while the data is being moved to the UART. The early release allows pipelined operation and increased performance. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP , and cPCI2IPand other Dynamic Engineering carriers support 32 bit access to IndustryPacks.

HDRribn50: (from Dynamic Engineering)
50 pin Ribbon cable with pull tabs and strain relief.
Multiple lengths and styles available

IP PULSE: (from Dynamic Engineering)
The IndustryPack compatible IP-Pulse features 4 independent programmable pulse generators. The outputs can be configured to be TTL /CMOS or RS422/485 compatible in several combinations. A real space saver for systems with both types of IO. Perfect for your embedded control applications.: The IndustryPack compatible IP-QuadUART design integrates a quad UART onto an IndustryPack module. The UART (16C854) features 128 byte FIFOs for RX and TX ports on each channel. The UART is supported by an advanced IP module interface implemented within a Xilinx FPGA.
The UART is a character based interface [8 bits]. The IndustryPack interface has several features which optimize performance. Words can be written to the IP-QuadUART and the data will be converted to bytes before being sent to the UART. The IP interface will latch the data allowing the host computer to be released while the data is being moved to the UART. The early release allows pipelined operation and increased performance. When the IP-QuadUART is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP and PCI5IP support 32 bit access to IndustryPacks.
IP-QuadUART-485: (from Dynamic Engineering)
The IndustryPack compatible IP-QuadUART-485 design integrates a quad UART onto an IndustryPack module. The UART (16C854) features 128 byte FIFOs for RX and TX ports on each channel. The UART is supported by an advanced IP module interface implemented within a Xilinx FPGA.
The UART is a character based interface [8 bits]. The IndustryPack interface has several features which optimize performance. Words can be written to the IP-QuadUART-485 and the data will be coverted to bytes before being sent to the UART. The IP interface will latch the data allowing the host computer to be released while the data is being moved to the UART. The early release allows pipelined operation and increased performance. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP , and cPCI2IPand other Dynamic Engineering carriers support 32 bit access to IndustryPacks.

HDRribn50: (from Dynamic Engineering)
50 pin Ribbon cable with pull tabs and strain relief.
Multiple lengths and styles available

IP PULSE: (from Dynamic Engineering)
The IndustryPack compatible IP-Pulse features 4 independent programmable pulse generators. The outputs can be configured to be TTL /CMOS or RS422/485 compatible in several combinations. A real space saver for systems with both types of IO. Perfect for your embedded control applications.: The IndustryPack compatible IP-QuadUART-485 design integrates a quad UART onto an IndustryPack module. The UART (16C854) features 128 byte FIFOs for RX and TX ports on each channel. The UART is supported by an advanced IP module interface implemented within a Xilinx FPGA.
The UART is a character based interface [8 bits]. The IndustryPack interface has several features which optimize performance. Words can be written to the IP-QuadUART-485 and the data will be coverted to bytes before being sent to the UART. The IP interface will latch the data allowing the host computer to be released while the data is being moved to the UART. The early release allows pipelined operation and increased performance. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP , and cPCI2IPand other Dynamic Engineering carriers support 32 bit access to IndustryPacks.
HDRribn50: (from Dynamic Engineering)
50 pin Ribbon cable with pull tabs and strain relief.
Multiple lengths and styles available

IP PULSE: (from Dynamic Engineering)
The IndustryPack compatible IP-Pulse features 4 independent programmable pulse generators. The outputs can be configured to be TTL /CMOS or RS422/485 compatible in several combinations. A real space saver for systems with both types of IO. Perfect for your embedded control applications.: 50 pin Ribbon cable with pull tabs and strain relief.
Multiple lengths and styles available
IP PULSE: (from Dynamic Engineering)
The IndustryPack compatible IP-Pulse features 4 independent programmable pulse generators. The outputs can be configured to be TTL /CMOS or RS422/485 compatible in several combinations. A real space saver for systems with both types of IO. Perfect for your embedded control applications.: The IndustryPack compatible IP-Pulse features 4 independent programmable pulse generators. The outputs can be configured to be TTL /CMOS or RS422/485 compatible in several combinations. A real space saver for systems with both types of IO. Perfect for your embedded control applications.