Serial I/O

Home

Vendors

Products

Serial I/O

IP Biserial BA1: (from Dynamic Engineering)
Intergrated Transmit and Receive channels. Odd or Even Parity generation and checking. Frame, Parity and overrun error checking on input channel. Transitions on the falling edge, valid data on the rising edge. Can be programmed to use an internal reference clock at multiple frequencies or the external reference clock.

IP-BISERIAL-IO: (from Dynamic Engineering)
Programmable Serial IO. 8/32 MHz IP Interface operation; Freq: User osc. up to 10 MHz., programmable internal reference with SW selectable rate divisor; 2K FIFO per channel Standard. 16K per channel optional. Data, Clk, Stb controls for Input and Output channels; TTL and 485 interfaces; External reference clock output standard; Interrupt or polled interface; Control registers are R/W. Custom requirements welcomed.

IP-BiSerial-NG4: (from Dynamic Engineering)
Features include: Software programmable 3/4 wire modes, parity, transmit frequency, the width of the synchronization pulse, the time delay after the sync and the start of data, and the time between data words. The word transfer has an associated Word Sync signal to provide for framing and error checking. The Frame sync signal provides for message level synchronization. The Ng4 has programmable receive word count and receive all mode. The IP BiSerial NG4 has a 50 MHz reference oscillator.

IP-Biserial-RTN2: (from Dynamic Engineering)
RTN2 is an update to the IP Biserial-BA2 with an expanded word counter, 16 Mb FIFO, programmable parity odd/even and on/off, programmable almost empty and programmable almost full interrupt capabilities added. IP, oscillator or user clock reference with 12 bit programmable divider for transmit frequencies. This product can now be ordered through our sales office: sales@dyneng.com (831) 336-8891.

IP-Octal-Serial: (from Dynamic Engineering)
8 Channel Serial Data Interface IP-OctalSerial is part of the IP Module family of modular I/O components capable of providing multiple serial protocols. The standard protocol implemented provides a Data, Clock and Strobe interface with Ready control. The –FCS version is a custom modification. The main modifications include lsb first format, gated clock, and custom strobe timing. In addition to the FCS version other custom interfaces are available. Please see our web page for current protocols offered. If you do not find it there we can redesign the state machines and create a custom interface protocol. That protocol will then be offered as a “standard” special order product. Please contact Dynamic Engineering with your custom application. The IP-OctalSerial-FCS supports both 8 and 32 MHz IP Bus operation. Differential I/O are available on the serial signals.

IP-OctalSerial: (from Dynamic Engineering)
IP-OctalSerial-IO is a Multi-channel Serial or Parallel communications and control interface. Each of the 8 channels has FIFO support. A total of 24 - 40 MHz rated RS-485 IO with programmable terminations are provided for complete flexibility with custom requirements. Programmable interrupts and status. The IP interface supports 8 and 32 MHz operation. The FIFOs are supported with a write through pipeline and early termination for the TX channels and a fast read capability on the RX channels for high performance. The TX FIFOs can be loaded in parallel if the same data set is to be sent via multiple channels.

IP-OptoISO-16: (from Dynamic Engineering)
16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 now available from Dynamic Engineering.

IP-QuadUART: (from Dynamic Engineering)
IP-QuadUART features the 16C854 with 128 byte FIFOs on each of 4 channels. Software selectable RS-232 and RS-422 / RS-485 operation on each channel. In RS232 mode the full MODEM signals are available [RX, TX, RTS, CTS, DTR, DSR, RI, DCD]. In RS422 mode the signals supported are [RX, TX, CTS, RTS ]. Multi-drop supported. Two local oscillators are provided to allow the full range of the UART to be utilized. 2M max rate and all of the standard baud rates. The IP interface has write through and pre-read capabilities for minimum over-head and maximum performance. 8,16, and with the proper carrier 32 bit accesses supported. 8 and 32 MHz IP interface.

IP-QuadUART-485: (from Dynamic Engineering)
features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.

BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intergrated Transmit and Receive channels. Odd or Even Parity generation and checking. Frame, Parity and overrun error checking on input channel. Transitions on the falling edge, valid data on the rising edge. Can be programmed to use an internal reference clock at multiple frequencies or the external reference clock.
IP-BISERIAL-IO: (from Dynamic Engineering)
Programmable Serial IO. 8/32 MHz IP Interface operation; Freq: User osc. up to 10 MHz., programmable internal reference with SW selectable rate divisor; 2K FIFO per channel Standard. 16K per channel optional. Data, Clk, Stb controls for Input and Output channels; TTL and 485 interfaces; External reference clock output standard; Interrupt or polled interface; Control registers are R/W. Custom requirements welcomed.

IP-BiSerial-NG4: (from Dynamic Engineering)
Features include: Software programmable 3/4 wire modes, parity, transmit frequency, the width of the synchronization pulse, the time delay after the sync and the start of data, and the time between data words. The word transfer has an associated Word Sync signal to provide for framing and error checking. The Frame sync signal provides for message level synchronization. The Ng4 has programmable receive word count and receive all mode. The IP BiSerial NG4 has a 50 MHz reference oscillator.

IP-Biserial-RTN2: (from Dynamic Engineering)
RTN2 is an update to the IP Biserial-BA2 with an expanded word counter, 16 Mb FIFO, programmable parity odd/even and on/off, programmable almost empty and programmable almost full interrupt capabilities added. IP, oscillator or user clock reference with 12 bit programmable divider for transmit frequencies. This product can now be ordered through our sales office: sales@dyneng.com (831) 336-8891.

IP-Octal-Serial: (from Dynamic Engineering)
8 Channel Serial Data Interface IP-OctalSerial is part of the IP Module family of modular I/O components capable of providing multiple serial protocols. The standard protocol implemented provides a Data, Clock and Strobe interface with Ready control. The –FCS version is a custom modification. The main modifications include lsb first format, gated clock, and custom strobe timing. In addition to the FCS version other custom interfaces are available. Please see our web page for current protocols offered. If you do not find it there we can redesign the state machines and create a custom interface protocol. That protocol will then be offered as a “standard” special order product. Please contact Dynamic Engineering with your custom application. The IP-OctalSerial-FCS supports both 8 and 32 MHz IP Bus operation. Differential I/O are available on the serial signals.

IP-OctalSerial: (from Dynamic Engineering)
IP-OctalSerial-IO is a Multi-channel Serial or Parallel communications and control interface. Each of the 8 channels has FIFO support. A total of 24 - 40 MHz rated RS-485 IO with programmable terminations are provided for complete flexibility with custom requirements. Programmable interrupts and status. The IP interface supports 8 and 32 MHz operation. The FIFOs are supported with a write through pipeline and early termination for the TX channels and a fast read capability on the RX channels for high performance. The TX FIFOs can be loaded in parallel if the same data set is to be sent via multiple channels.

IP-OptoISO-16: (from Dynamic Engineering)
16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 now available from Dynamic Engineering.

IP-QuadUART: (from Dynamic Engineering)
IP-QuadUART features the 16C854 with 128 byte FIFOs on each of 4 channels. Software selectable RS-232 and RS-422 / RS-485 operation on each channel. In RS232 mode the full MODEM signals are available [RX, TX, RTS, CTS, DTR, DSR, RI, DCD]. In RS422 mode the signals supported are [RX, TX, CTS, RTS ]. Multi-drop supported. Two local oscillators are provided to allow the full range of the UART to be utilized. 2M max rate and all of the standard baud rates. The IP interface has write through and pre-read capabilities for minimum over-head and maximum performance. 8,16, and with the proper carrier 32 bit accesses supported. 8 and 32 MHz IP interface.

IP-QuadUART-485: (from Dynamic Engineering)
features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.

BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Programmable Serial IO. 8/32 MHz IP Interface operation; Freq: User osc. up to 10 MHz., programmable internal reference with SW selectable rate divisor; 2K FIFO per channel Standard. 16K per channel optional. Data, Clk, Stb controls for Input and Output channels; TTL and 485 interfaces; External reference clock output standard; Interrupt or polled interface; Control registers are R/W. Custom requirements welcomed.
IP-BiSerial-NG4: (from Dynamic Engineering)
Features include: Software programmable 3/4 wire modes, parity, transmit frequency, the width of the synchronization pulse, the time delay after the sync and the start of data, and the time between data words. The word transfer has an associated Word Sync signal to provide for framing and error checking. The Frame sync signal provides for message level synchronization. The Ng4 has programmable receive word count and receive all mode. The IP BiSerial NG4 has a 50 MHz reference oscillator.

IP-Biserial-RTN2: (from Dynamic Engineering)
RTN2 is an update to the IP Biserial-BA2 with an expanded word counter, 16 Mb FIFO, programmable parity odd/even and on/off, programmable almost empty and programmable almost full interrupt capabilities added. IP, oscillator or user clock reference with 12 bit programmable divider for transmit frequencies. This product can now be ordered through our sales office: sales@dyneng.com (831) 336-8891.

IP-Octal-Serial: (from Dynamic Engineering)
8 Channel Serial Data Interface IP-OctalSerial is part of the IP Module family of modular I/O components capable of providing multiple serial protocols. The standard protocol implemented provides a Data, Clock and Strobe interface with Ready control. The –FCS version is a custom modification. The main modifications include lsb first format, gated clock, and custom strobe timing. In addition to the FCS version other custom interfaces are available. Please see our web page for current protocols offered. If you do not find it there we can redesign the state machines and create a custom interface protocol. That protocol will then be offered as a “standard” special order product. Please contact Dynamic Engineering with your custom application. The IP-OctalSerial-FCS supports both 8 and 32 MHz IP Bus operation. Differential I/O are available on the serial signals.

IP-OctalSerial: (from Dynamic Engineering)
IP-OctalSerial-IO is a Multi-channel Serial or Parallel communications and control interface. Each of the 8 channels has FIFO support. A total of 24 - 40 MHz rated RS-485 IO with programmable terminations are provided for complete flexibility with custom requirements. Programmable interrupts and status. The IP interface supports 8 and 32 MHz operation. The FIFOs are supported with a write through pipeline and early termination for the TX channels and a fast read capability on the RX channels for high performance. The TX FIFOs can be loaded in parallel if the same data set is to be sent via multiple channels.

IP-OptoISO-16: (from Dynamic Engineering)
16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 now available from Dynamic Engineering.

IP-QuadUART: (from Dynamic Engineering)
IP-QuadUART features the 16C854 with 128 byte FIFOs on each of 4 channels. Software selectable RS-232 and RS-422 / RS-485 operation on each channel. In RS232 mode the full MODEM signals are available [RX, TX, RTS, CTS, DTR, DSR, RI, DCD]. In RS422 mode the signals supported are [RX, TX, CTS, RTS ]. Multi-drop supported. Two local oscillators are provided to allow the full range of the UART to be utilized. 2M max rate and all of the standard baud rates. The IP interface has write through and pre-read capabilities for minimum over-head and maximum performance. 8,16, and with the proper carrier 32 bit accesses supported. 8 and 32 MHz IP interface.

IP-QuadUART-485: (from Dynamic Engineering)
features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.

BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Features include: Software programmable 3/4 wire modes, parity, transmit frequency, the width of the synchronization pulse, the time delay after the sync and the start of data, and the time between data words. The word transfer has an associated Word Sync signal to provide for framing and error checking. The Frame sync signal provides for message level synchronization. The Ng4 has programmable receive word count and receive all mode. The IP BiSerial NG4 has a 50 MHz reference oscillator.
IP-Biserial-RTN2: (from Dynamic Engineering)
RTN2 is an update to the IP Biserial-BA2 with an expanded word counter, 16 Mb FIFO, programmable parity odd/even and on/off, programmable almost empty and programmable almost full interrupt capabilities added. IP, oscillator or user clock reference with 12 bit programmable divider for transmit frequencies. This product can now be ordered through our sales office: sales@dyneng.com (831) 336-8891.

IP-Octal-Serial: (from Dynamic Engineering)
8 Channel Serial Data Interface IP-OctalSerial is part of the IP Module family of modular I/O components capable of providing multiple serial protocols. The standard protocol implemented provides a Data, Clock and Strobe interface with Ready control. The –FCS version is a custom modification. The main modifications include lsb first format, gated clock, and custom strobe timing. In addition to the FCS version other custom interfaces are available. Please see our web page for current protocols offered. If you do not find it there we can redesign the state machines and create a custom interface protocol. That protocol will then be offered as a “standard” special order product. Please contact Dynamic Engineering with your custom application. The IP-OctalSerial-FCS supports both 8 and 32 MHz IP Bus operation. Differential I/O are available on the serial signals.

IP-OctalSerial: (from Dynamic Engineering)
IP-OctalSerial-IO is a Multi-channel Serial or Parallel communications and control interface. Each of the 8 channels has FIFO support. A total of 24 - 40 MHz rated RS-485 IO with programmable terminations are provided for complete flexibility with custom requirements. Programmable interrupts and status. The IP interface supports 8 and 32 MHz operation. The FIFOs are supported with a write through pipeline and early termination for the TX channels and a fast read capability on the RX channels for high performance. The TX FIFOs can be loaded in parallel if the same data set is to be sent via multiple channels.

IP-OptoISO-16: (from Dynamic Engineering)
16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 now available from Dynamic Engineering.

IP-QuadUART: (from Dynamic Engineering)
IP-QuadUART features the 16C854 with 128 byte FIFOs on each of 4 channels. Software selectable RS-232 and RS-422 / RS-485 operation on each channel. In RS232 mode the full MODEM signals are available [RX, TX, RTS, CTS, DTR, DSR, RI, DCD]. In RS422 mode the signals supported are [RX, TX, CTS, RTS ]. Multi-drop supported. Two local oscillators are provided to allow the full range of the UART to be utilized. 2M max rate and all of the standard baud rates. The IP interface has write through and pre-read capabilities for minimum over-head and maximum performance. 8,16, and with the proper carrier 32 bit accesses supported. 8 and 32 MHz IP interface.

IP-QuadUART-485: (from Dynamic Engineering)
features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.

BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: RTN2 is an update to the IP Biserial-BA2 with an expanded word counter, 16 Mb FIFO, programmable parity odd/even and on/off, programmable almost empty and programmable almost full interrupt capabilities added. IP, oscillator or user clock reference with 12 bit programmable divider for transmit frequencies. This product can now be ordered through our sales office: sales@dyneng.com (831) 336-8891.
IP-Octal-Serial: (from Dynamic Engineering)
8 Channel Serial Data Interface IP-OctalSerial is part of the IP Module family of modular I/O components capable of providing multiple serial protocols. The standard protocol implemented provides a Data, Clock and Strobe interface with Ready control. The –FCS version is a custom modification. The main modifications include lsb first format, gated clock, and custom strobe timing. In addition to the FCS version other custom interfaces are available. Please see our web page for current protocols offered. If you do not find it there we can redesign the state machines and create a custom interface protocol. That protocol will then be offered as a “standard” special order product. Please contact Dynamic Engineering with your custom application. The IP-OctalSerial-FCS supports both 8 and 32 MHz IP Bus operation. Differential I/O are available on the serial signals.

IP-OctalSerial: (from Dynamic Engineering)
IP-OctalSerial-IO is a Multi-channel Serial or Parallel communications and control interface. Each of the 8 channels has FIFO support. A total of 24 - 40 MHz rated RS-485 IO with programmable terminations are provided for complete flexibility with custom requirements. Programmable interrupts and status. The IP interface supports 8 and 32 MHz operation. The FIFOs are supported with a write through pipeline and early termination for the TX channels and a fast read capability on the RX channels for high performance. The TX FIFOs can be loaded in parallel if the same data set is to be sent via multiple channels.

IP-OptoISO-16: (from Dynamic Engineering)
16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 now available from Dynamic Engineering.

IP-QuadUART: (from Dynamic Engineering)
IP-QuadUART features the 16C854 with 128 byte FIFOs on each of 4 channels. Software selectable RS-232 and RS-422 / RS-485 operation on each channel. In RS232 mode the full MODEM signals are available [RX, TX, RTS, CTS, DTR, DSR, RI, DCD]. In RS422 mode the signals supported are [RX, TX, CTS, RTS ]. Multi-drop supported. Two local oscillators are provided to allow the full range of the UART to be utilized. 2M max rate and all of the standard baud rates. The IP interface has write through and pre-read capabilities for minimum over-head and maximum performance. 8,16, and with the proper carrier 32 bit accesses supported. 8 and 32 MHz IP interface.

IP-QuadUART-485: (from Dynamic Engineering)
features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.

BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 8 Channel Serial Data Interface IP-OctalSerial is part of the IP Module family of modular I/O components capable of providing multiple serial protocols. The standard protocol implemented provides a Data, Clock and Strobe interface with Ready control. The –FCS version is a custom modification. The main modifications include lsb first format, gated clock, and custom strobe timing. In addition to the FCS version other custom interfaces are available. Please see our web page for current protocols offered. If you do not find it there we can redesign the state machines and create a custom interface protocol. That protocol will then be offered as a “standard” special order product. Please contact Dynamic Engineering with your custom application. The IP-OctalSerial-FCS supports both 8 and 32 MHz IP Bus operation. Differential I/O are available on the serial signals.
IP-OctalSerial: (from Dynamic Engineering)
IP-OctalSerial-IO is a Multi-channel Serial or Parallel communications and control interface. Each of the 8 channels has FIFO support. A total of 24 - 40 MHz rated RS-485 IO with programmable terminations are provided for complete flexibility with custom requirements. Programmable interrupts and status. The IP interface supports 8 and 32 MHz operation. The FIFOs are supported with a write through pipeline and early termination for the TX channels and a fast read capability on the RX channels for high performance. The TX FIFOs can be loaded in parallel if the same data set is to be sent via multiple channels.

IP-OptoISO-16: (from Dynamic Engineering)
16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 now available from Dynamic Engineering.

IP-QuadUART: (from Dynamic Engineering)
IP-QuadUART features the 16C854 with 128 byte FIFOs on each of 4 channels. Software selectable RS-232 and RS-422 / RS-485 operation on each channel. In RS232 mode the full MODEM signals are available [RX, TX, RTS, CTS, DTR, DSR, RI, DCD]. In RS422 mode the signals supported are [RX, TX, CTS, RTS ]. Multi-drop supported. Two local oscillators are provided to allow the full range of the UART to be utilized. 2M max rate and all of the standard baud rates. The IP interface has write through and pre-read capabilities for minimum over-head and maximum performance. 8,16, and with the proper carrier 32 bit accesses supported. 8 and 32 MHz IP interface.

IP-QuadUART-485: (from Dynamic Engineering)
features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.

BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: IP-OctalSerial-IO is a Multi-channel Serial or Parallel communications and control interface. Each of the 8 channels has FIFO support. A total of 24 - 40 MHz rated RS-485 IO with programmable terminations are provided for complete flexibility with custom requirements. Programmable interrupts and status. The IP interface supports 8 and 32 MHz operation. The FIFOs are supported with a write through pipeline and early termination for the TX channels and a fast read capability on the RX channels for high performance. The TX FIFOs can be loaded in parallel if the same data set is to be sent via multiple channels.
IP-OptoISO-16: (from Dynamic Engineering)
16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 now available from Dynamic Engineering.

IP-QuadUART: (from Dynamic Engineering)
IP-QuadUART features the 16C854 with 128 byte FIFOs on each of 4 channels. Software selectable RS-232 and RS-422 / RS-485 operation on each channel. In RS232 mode the full MODEM signals are available [RX, TX, RTS, CTS, DTR, DSR, RI, DCD]. In RS422 mode the signals supported are [RX, TX, CTS, RTS ]. Multi-drop supported. Two local oscillators are provided to allow the full range of the UART to be utilized. 2M max rate and all of the standard baud rates. The IP interface has write through and pre-read capabilities for minimum over-head and maximum performance. 8,16, and with the proper carrier 32 bit accesses supported. 8 and 32 MHz IP interface.

IP-QuadUART-485: (from Dynamic Engineering)
features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.

BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 16 Optically Isolated High Voltage Outputs
IP-OptoISO-16 is an IndustryPack® Module with 16 optically controlled FET switches. Each FET acts as a single pole normally open photo-voltaic relay. The solid state approach has several advantages including bounce free operation, low on resistance, long life, fast switching, and higher reliability when compared to relays. Each optical switch operates independently. IP-OptoISO-16 now available from Dynamic Engineering.
IP-QuadUART: (from Dynamic Engineering)
IP-QuadUART features the 16C854 with 128 byte FIFOs on each of 4 channels. Software selectable RS-232 and RS-422 / RS-485 operation on each channel. In RS232 mode the full MODEM signals are available [RX, TX, RTS, CTS, DTR, DSR, RI, DCD]. In RS422 mode the signals supported are [RX, TX, CTS, RTS ]. Multi-drop supported. Two local oscillators are provided to allow the full range of the UART to be utilized. 2M max rate and all of the standard baud rates. The IP interface has write through and pre-read capabilities for minimum over-head and maximum performance. 8,16, and with the proper carrier 32 bit accesses supported. 8 and 32 MHz IP interface.

IP-QuadUART-485: (from Dynamic Engineering)
features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.

BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: IP-QuadUART features the 16C854 with 128 byte FIFOs on each of 4 channels. Software selectable RS-232 and RS-422 / RS-485 operation on each channel. In RS232 mode the full MODEM signals are available [RX, TX, RTS, CTS, DTR, DSR, RI, DCD]. In RS422 mode the signals supported are [RX, TX, CTS, RTS ]. Multi-drop supported. Two local oscillators are provided to allow the full range of the UART to be utilized. 2M max rate and all of the standard baud rates. The IP interface has write through and pre-read capabilities for minimum over-head and maximum performance. 8,16, and with the proper carrier 32 bit accesses supported. 8 and 32 MHz IP interface.
IP-QuadUART-485: (from Dynamic Engineering)
features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.

BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: features 4 UARTs w/full or half duplex differential IO [RX, TX, CTS, RTS, DTR, DSR]. Two reference oscillators provide 1.5 MHz max and all of the standard baud rates. The quad UART utilized is the 16C854. The quad UART is supported by an advanced IP module interface implemented within a Xilinx FPGA. Write through, multi-byte and pre-read capabilities speed host interaction with the IP-QuadUART-485. When the IP-QuadUART-485 is mounted to a carrier which supports 32 bit operations the effect can be enhanced. The PCI3IP, PCI5IP, and cPCI2IP support 32 bit access to IndustryPacks.
BD-485: (from Interface Concept)
4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER

BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 4 serial RS485 channels - Three-state control - 2000V opto-isolated outputs (DC/DC converter), 3U high / 86mm depth - To use with IP-SER
BD-MULA: (from Interface Concept)
4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER

CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 4 serial channels for LAN and WAN interfaces - Asynchronous and synchronous multi-mode software programmable ports, Full modem protected lines - 6U high / 100mm depth - To use with IP-SER
CPL-SER: (from Interface Concept)
VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162

IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: VMEbus Asynchronous & Synchronous serial channels coupleurs including IP-SER, BD-485, BD-MULA and MVME162
IP-Comm302-16-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intelligent Serial Communication. MC68302/16MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.
IP-Comm302-25-256: (from SBS Technologies)
Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intelligent Serial Communication. MC68302/25MHz, 3 CH, 256KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.
IP-Comm302-25-512: (from SBS Technologies)
Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.

IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intellicent Serial Communication. MC68302/25MHz, 3 CH, 512KB SRAM. Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available.
IP-Comm302-PGA: (from SBS Technologies)
Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.

IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intelligent Serial Communication. Same as above, except 512KB DP RAM, socketed 68302 'PGA for in-circuit emulation.
IP-Comm360-25-1: (from SBS Technologies)
Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.

IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intelligent Serial Communication. MC68360, 4 CH, 8 DMA CH, 2MB DP RAM, Async, SDLC/HDLC, Bisync, ISDN, X.25.
IP-Comm360-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intelligent Serial Communication. MC68360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available
IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available
IP-Comm360EN-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intelligent Serial Communication. MC68EN360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available
IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available
IP-Comm360MH-25-2: (from SBS Technologies)
Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available

IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Intelligent Serial Communication. MC68MH360/25MHz, 4 CH, 2MB DRAM, 256 KB Flash, 256 KB SRAM, Async, HDLC, SDLC, Bisync, X.25, ISDN. SS7 software available
IP-MP Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.

IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Multi-Protocol Serial, 2 Ind. CH, Z16C30, Sync, Async, RS232/422/423/485, multiprotocol, to 10Mb/s, DMA, 32MHz IP Bus.
IP-MP Serial-423: (from SBS Technologies)
Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.

IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Multi-Protocol Serial. 2 Ind. CH. Z16C30, Sync, Async. RS423 MIL-188C. Up to 10 Mbits/sec. DMA, 32 MHz IP bus.
IP-Octal 232: (from SBS Technologies)
Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.

IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Eight RS-232 Channels, 8 Async CH, RS-232 to 38.4KBaud, 2 modem control lines each channel, supports interrupts.
IP-Octal 422: (from SBS Technologies)
Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.

IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Eight RS-422 Channels, 8 Async CH, RS-422 to 38.4KBaud. Tx, Rx, and shield each channel, supports interrupts.
IP-Octal 423: (from SBS Technologies)
High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.

IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: High Density RS-423 Channels, 8 channels of Asynch RS-423 to 38.4KBaud, in groups of 8, Tx, Rx, RTS, CTS, GND, supports interrupts.
IP-Octal 485: (from SBS Technologies)
Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.

IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Eight RS-485 Channels, 8 Async CH, RS-485 to 38.4KBaud, bidirectional Data Pair (Dx) and shield each channel, supports interrupts.
IP-Octal Opto: (from SBS Technologies)
Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.

IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Optically Isolated Serial, 8 Opto-isolated RS-232 Async CH. Same as IP-Octal 232 except opto-isolation, double-wide.
IP-Quad Serial: (from SBS Technologies)
Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.

IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Four RS-232 Channels, 4 Async RS-232D to 38.4KBaud, full modem control lines, full interrupt support, 4 counter/timers.
IP-QuadPlus-422-ET: (from SBS Technologies)
Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.

IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Four high speed RS-422 serial ports, up to 260 kBaud. Includes modem control signals, on-board oscillator, 64 bytes FIFO. Ext Temp.
IP-SER: (from Interface Concept)
4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs

IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 4 high performance (2 DMA) serial channels - SCC 85230 - Full modem TTL outputs
IP-Serial: (from SBS Technologies)
Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.

IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Two Channel Serial, 2 multi-protocol RS-232/422/485, async/sync to 2MBaud, SDLC, HDLC, X.25. Interrupts.
IP-Universal Serial: (from SBS Technologies)
Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.

IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Multi-Protocol Serial, 2 Ind. CH, RS-232/422/485, sync/async, multiprotocol, Zilog Z16C30, to 10Mb/s.
IPM-422/485/CSDB: (from Max Technologies)
Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.

MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Provides RS422 communication with advanced messages timing control. Eight 422/485 channels (4tx-4rx), 8 Mhz IP interface. 7 or 8 bit Word size. Per word selectable parity Odd or EVEN. 16 words timetag buffer. Per word 1 us 16 bit word scheduler. Receiver 1 uS, 16 bit timetag. Eight bidirectional TTL I/O. Sync pluse generation.
MVIP301: (from Motorola Inc., Embedded Communications Computing)
Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.

MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Dual Serial Interface Module. EIA232-D & EIA-422-A are fully supported, programmable baud rates to 2Mbit/s, asynchronous or synchronous protocols including NRZ, FM, TI; CRC; loopback; four character FIFO´s and vectored interrupts.
MVIP302: (from Motorola Inc., Embedded Communications Computing)
Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Octal Serial Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.
MVIP303: (from Motorola Inc., Embedded Communications Computing)
Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.

NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Octal 422 Interface Module. The MVIP302 provides eight asynchronous full duplex receiver/transmitter EIA-232-D serial channels. Quadruple buffering the receiver data permits higher data rates with longer interrupt service latencies.
NICE-360-SIO: (from N.A.T. GmbH)
The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.

NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: The NICE-360-SIO is an Industry Pack module based on the MC68360. All four SCCs of the MC68360 can be used. RS232, RS485/422 are the available ports for half or full duplex transmission with the option of optical isolation.
NTM-Basic: (from N.A.T. GmbH)
The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.

TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: The N.A.T. transition module makes the I/O signals from the N.A.T. IP modules available for further usage with the Transition Module Interfaces, such as Ethernet (NTM-10BaseT), serial I/O (NTM-R2232, NTM-RS422, NTM-RS485) and many others.
TIP302-10: (from TEWS TECHNOLGIES GmbH)
Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C

TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: Serial communication I/O interface with Multiprotocol Communication Processor MC68302, 3 serial channels and 4 general purpose I/O lines, 1 Mbyte of Dual-Port SRAM (512K x 16) for program and data; Operating temperature 0°C to +70°C
TIP865-10: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 4 channels of high performance multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C
TIP865-11: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C

TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 4 channels of high performance multi-mode serial TTL interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to +70°C
TIP865-20: (from TEWS TECHNOLGIES GmbH)
4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C

TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 4 channels of high performance multi-mode serial RS422 interface; Programmable baud rates up to 2 MBit/s, async or synchronous protocols; Vectored interrupt; Support of full modem controls: RxD+/-, TxD+/-, clock+/-; Operating Temperature 0°C to +70°C
TIP865-30: (from TEWS TECHNOLGIES GmbH)
4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C

TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 4 channel of high perfomrance multi-mode serial RS-485 2-wire multi drop interface; Programmable baud rates to 2Mbit/s, async or sync protocols, vectored interrupt, support of full modem controls, Operating Temperature 0°C to +70°C
TIP866-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 8 channels of high performance RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C
TIP866-11: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C

TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 8 channels of high performance TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD, TxD, RTS, CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to +70°C
TIP866-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C

TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 8 channels of high performance RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored interrupt; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature 0°C to +70°C
TIP867-10: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C

TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C
TIP867-20: (from TEWS TECHNOLGIES GmbH)
8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C: 8 channels of high performance RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored interrupt; Support of Dx+/-, CLK+/- and GND per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C